Massachusetts Oil Burner Test Questions and Answers | Correct Answers | Graded A+

Massachusetts Oil Burner Test
Questions and Answers | Correct
Answers | Graded A+

‣ What are the 3 funtions of an Oil Burner nozzle? -✓✓Atomize, Meter,
Patter.


‣ What are the 2 voltage circuits of a primary control? -✓✓Line & Low.


‣ What is the function of a fuse? -✓✓Protect circuit.


‣ What is the High Limit cut out? -✓✓Max safe Temp or Pressure
setting.


‣ What is the High Limit cut in? -✓✓Cut out minus Differential.


‣ What is the "Max" Lockout time for a burner with a 3 GPH Flow Rate?
-✓✓45 Seconds.


‣ What is the minimum stack temperature which will allow a stack
switch to work? -✓✓400 degrees F


‣ When do you apply a permit to store oil? -✓✓10 gallons.

, ‣ What is the "Main" function of an oil burner Primary Control? -
✓✓Prove Flame.


‣ Stack Relay must be reset after lockout? True? or False? -✓✓True.


‣ What is the Required minimum height required for fill and vent pipes?
-✓✓3 Feet.


‣ What is the smallest vent pipe used for residential. -✓✓1 inch 1/4


‣ What size is the oil line for a residential burner? -✓✓3/8


‣ Largest oil capacity for residential without a license? -✓✓10,000
Gallons


‣ At what height ceiling would a second thermal switch be required? -
✓✓12'


‣ A typical residential oil burner is also s/u to run Kerosene True? Or
False? -✓✓False


‣ Permit to install an oil burner is issued by the? -✓✓State Fire Marshall