JLTV TEST. LATEST 2026-2027.
QUESTIONS & CORRECT ANSWERS.
GRADED A
Air over hydraulic brakes function by...
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes
B. The air pressure for service brakes is monitored by the CTIS, CTIS
sends the signal to the hydraulic components of when to apply or not apply.
C. The CAC controls the air circulation directly to the service brake, when
the service brake is engaged it pushes hydraulic fluid through the lines to
activate the brakes
D. When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage -
ANSD. When the air system is charged, the air pressure holds the
hydraulic braking components open so they cannot apply; when service
brake applied, it drops psi allowing hydraulic components to apply/engage.
Although several options are possible, what is the most critical reason the
vehicle must be configured before driving on soft soils?
A. Protect the drivetrain and suspension as the soft soils case wheel
slippage and potential binding
B. to maintain momentum
1
, C. To avoid skidding from making changes on soft soil
D. To avoid stalling the engine due to making changes while on the soft soil
- ANSA. Protect the drivetrain and suspension as the soft soils case wheel
slippage and potential binding
Braking while corning will make the JLTV have a tendency to...
A. Pull
B. Push - ANSB. push
Combat Override is only to be used in emergency situations. Which of
these factors below are true for how combat override affects the JLTV?
A. Provides an emergency bypass in the event of a DSDU failure
B. Disables neutral safety start
C. Bypasses all speed imitations protecting the drivetrain and CTIS settings
protecting the wheels
D. All of the above - ANSD. All of the above
CTIS - ANSCentral Tire Inflation System
DSDU - ANSDrivers Smart Display Unit
Fording - ANS30 in without kit (top of the tire)
60 in with kit (middle of the air filter)
JLTV winch zone - ANS30 degrees
2
QUESTIONS & CORRECT ANSWERS.
GRADED A
Air over hydraulic brakes function by...
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes
B. The air pressure for service brakes is monitored by the CTIS, CTIS
sends the signal to the hydraulic components of when to apply or not apply.
C. The CAC controls the air circulation directly to the service brake, when
the service brake is engaged it pushes hydraulic fluid through the lines to
activate the brakes
D. When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage -
ANSD. When the air system is charged, the air pressure holds the
hydraulic braking components open so they cannot apply; when service
brake applied, it drops psi allowing hydraulic components to apply/engage.
Although several options are possible, what is the most critical reason the
vehicle must be configured before driving on soft soils?
A. Protect the drivetrain and suspension as the soft soils case wheel
slippage and potential binding
B. to maintain momentum
1
, C. To avoid skidding from making changes on soft soil
D. To avoid stalling the engine due to making changes while on the soft soil
- ANSA. Protect the drivetrain and suspension as the soft soils case wheel
slippage and potential binding
Braking while corning will make the JLTV have a tendency to...
A. Pull
B. Push - ANSB. push
Combat Override is only to be used in emergency situations. Which of
these factors below are true for how combat override affects the JLTV?
A. Provides an emergency bypass in the event of a DSDU failure
B. Disables neutral safety start
C. Bypasses all speed imitations protecting the drivetrain and CTIS settings
protecting the wheels
D. All of the above - ANSD. All of the above
CTIS - ANSCentral Tire Inflation System
DSDU - ANSDrivers Smart Display Unit
Fording - ANS30 in without kit (top of the tire)
60 in with kit (middle of the air filter)
JLTV winch zone - ANS30 degrees
2
