GENERAL CRANE SAFETY EXAM 2025-2026
ACTUAL EXAM 100 QUESTIONS AND CORRECT
DETAILED ANSWERS WITH RATIONALES
(VERIFIED ANSWERS)
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (122)
All of the following are C) Shackles and eyebolts
principle parts of an
overhead traveling crane
EXCEPT-
A) Operator's cab or
pendant control
B) End trucks
C) Shackles and eyebolts
D) Bridge girders
E) Trolley with hoisting
mechanism
,All of the following C) Non-cab operated category 3 bridge crane
require a license to
operate EXCEPT a(n)-
A) Cab-operated
category 3 bridge crane
B) Mobile hydraulic truck
crane
C) Non-cab operated
category 3 bridge crane
D) Articulating boom
category 4 crane
E) Floor-operated
category 2 bridge crane
Bridge cranes with rated C) Category 3
capacities of less than
20,000 pounds are
classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
Bridge crane with rated B) Category 2
capacities of 20,000
pounds or greater are
classified as_______cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
,Commercial truck- A) Category 1
mounted cranes having
telescoping or articulating
booms and a capacity of
less than 2,000 pounds are
classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
A commercial truck D) Category 4
mounted crane with a
capacity of 14,000 pounds
is a______crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
Common modes of B) hoist, trolley, and bridge
operation for typical OET
bridge cranes are
A) skew, hoist, and bridge
B) hoist, trolley, and
bridge
C) travel, rotate, and hoist
D) hoist, luffing, and
trolley
E) bridge, rotate, and
extend
, Components that affect A) operational safety devices
the safety and capability
of the Weight Handling
Equipment by stopping or
limiting the operation
when activated are
A) operational safety
devices
B) general safety devices
C) alterations and/or
modifications
D) load bearing parts
E) load controlling parts
Components that control, D) Load controlling parts
restrain, or position the
load and upon failure W
would cause dropping,
shifting, or uncontrolled
movement of the load are
A) Alterations and/or
modifications
B) Operational safety
devices
C) Load bearing parts
D) Load controlling parts
E) General safety devices
ACTUAL EXAM 100 QUESTIONS AND CORRECT
DETAILED ANSWERS WITH RATIONALES
(VERIFIED ANSWERS)
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (122)
All of the following are C) Shackles and eyebolts
principle parts of an
overhead traveling crane
EXCEPT-
A) Operator's cab or
pendant control
B) End trucks
C) Shackles and eyebolts
D) Bridge girders
E) Trolley with hoisting
mechanism
,All of the following C) Non-cab operated category 3 bridge crane
require a license to
operate EXCEPT a(n)-
A) Cab-operated
category 3 bridge crane
B) Mobile hydraulic truck
crane
C) Non-cab operated
category 3 bridge crane
D) Articulating boom
category 4 crane
E) Floor-operated
category 2 bridge crane
Bridge cranes with rated C) Category 3
capacities of less than
20,000 pounds are
classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
Bridge crane with rated B) Category 2
capacities of 20,000
pounds or greater are
classified as_______cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
,Commercial truck- A) Category 1
mounted cranes having
telescoping or articulating
booms and a capacity of
less than 2,000 pounds are
classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
A commercial truck D) Category 4
mounted crane with a
capacity of 14,000 pounds
is a______crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4
Common modes of B) hoist, trolley, and bridge
operation for typical OET
bridge cranes are
A) skew, hoist, and bridge
B) hoist, trolley, and
bridge
C) travel, rotate, and hoist
D) hoist, luffing, and
trolley
E) bridge, rotate, and
extend
, Components that affect A) operational safety devices
the safety and capability
of the Weight Handling
Equipment by stopping or
limiting the operation
when activated are
A) operational safety
devices
B) general safety devices
C) alterations and/or
modifications
D) load bearing parts
E) load controlling parts
Components that control, D) Load controlling parts
restrain, or position the
load and upon failure W
would cause dropping,
shifting, or uncontrolled
movement of the load are
A) Alterations and/or
modifications
B) Operational safety
devices
C) Load bearing parts
D) Load controlling parts
E) General safety devices
