CPT - STUDY GUIDE WITH ALL CORRECT & 100% VERIFIED ANSWERS
|LATEST VERSION |ALREADY GRADED A+
1. This course is approved by the IICRC, IICRC
Institute of Inspection
stands for:
Cleaning and Restoration
2. When processing and cleaning textiles Certification
and soft furnishings, The industry Standard
S300
for processing and cleaning textiles and
soft furnishings is the:
.
3. A material used in clothing and
Leather
furnishings that made from animal hide
is:
Nubuck, suede leather
4. Certain types of leather, such as ,
and require specialty
cleaning techniques.
scheduled property
5. Valuable personal property that is
individually listed on an insurance
policy is referred to as: are subject to change at any
time
6. Current knowledge of industry worker
safety standards is important because
they: removing any noticeable odor
7. When decontaminating contents on a
trauma or crime scene, initial safety hazard assessment
steps should include:
8. An evaluation of a jobsite to identify
potential threats to health and safety
is called a:
9. The required personal protective equipment
shall be determined through:
1/
17
, CPT - STUDY GUIDE WITH ALL CORRECT & 100% VERIFIED ANSWERS
|LATEST VERSION |ALREADY GRADED A+
10. All persons required to use respirators: shall be medically evaluated,
fit
tested, and properly trained
11.
2/
17
, CPT - STUDY GUIDE WITH ALL CORRECT & 100% VERIFIED ANSWERS
|LATEST VERSION |ALREADY GRADED A+
When the presence of toxic substances is sus-use appropriate personal protec-
pected tive equipment
12. Products used to kill or inactivate disinfectants
microorgan- isms are called:
13. Technicians can obtain accurate SDS, product labels, and training
information about potential chemical
safety hazards from:
polycyclic aromatic hydrocarbons
14. The potential of developing lung, skin, and
blad- der cancers can be increased by
repeated expo- sure to:
associated health hazards usually
15. After appropriate cleaning and no longer exist
decontamination procedures have
removed residues from a fire:
16. Smoke residues from burned plastics tend to be: easily smeared and
corrosive
17. The thickness of deposited soot on a magnetic attraction
surface can be increased by:
18. When blood or OPIM dry, they: can become airborne and
poten- tially cause health
hazards
19. A careful inspection of each item or surface: should be conducted prior to
restoration
20. The hidden areas and internal 22. Identifying pre-
components of upholstered furniture: existing
conditions is:
21. When the presence of toxic substances
is sus- pected:
3/
17
|LATEST VERSION |ALREADY GRADED A+
1. This course is approved by the IICRC, IICRC
Institute of Inspection
stands for:
Cleaning and Restoration
2. When processing and cleaning textiles Certification
and soft furnishings, The industry Standard
S300
for processing and cleaning textiles and
soft furnishings is the:
.
3. A material used in clothing and
Leather
furnishings that made from animal hide
is:
Nubuck, suede leather
4. Certain types of leather, such as ,
and require specialty
cleaning techniques.
scheduled property
5. Valuable personal property that is
individually listed on an insurance
policy is referred to as: are subject to change at any
time
6. Current knowledge of industry worker
safety standards is important because
they: removing any noticeable odor
7. When decontaminating contents on a
trauma or crime scene, initial safety hazard assessment
steps should include:
8. An evaluation of a jobsite to identify
potential threats to health and safety
is called a:
9. The required personal protective equipment
shall be determined through:
1/
17
, CPT - STUDY GUIDE WITH ALL CORRECT & 100% VERIFIED ANSWERS
|LATEST VERSION |ALREADY GRADED A+
10. All persons required to use respirators: shall be medically evaluated,
fit
tested, and properly trained
11.
2/
17
, CPT - STUDY GUIDE WITH ALL CORRECT & 100% VERIFIED ANSWERS
|LATEST VERSION |ALREADY GRADED A+
When the presence of toxic substances is sus-use appropriate personal protec-
pected tive equipment
12. Products used to kill or inactivate disinfectants
microorgan- isms are called:
13. Technicians can obtain accurate SDS, product labels, and training
information about potential chemical
safety hazards from:
polycyclic aromatic hydrocarbons
14. The potential of developing lung, skin, and
blad- der cancers can be increased by
repeated expo- sure to:
associated health hazards usually
15. After appropriate cleaning and no longer exist
decontamination procedures have
removed residues from a fire:
16. Smoke residues from burned plastics tend to be: easily smeared and
corrosive
17. The thickness of deposited soot on a magnetic attraction
surface can be increased by:
18. When blood or OPIM dry, they: can become airborne and
poten- tially cause health
hazards
19. A careful inspection of each item or surface: should be conducted prior to
restoration
20. The hidden areas and internal 22. Identifying pre-
components of upholstered furniture: existing
conditions is:
21. When the presence of toxic substances
is sus- pected:
3/
17
