Massachusetts Hoisting Training Exam ||Newest
Exam!!|| Most Recent Exam Actual Complete Real
Exam Questions And Correct Answers (Verified
Answers) Already Graded A+ | Guaranteed Success!! |
Newest Exam!!!
In the one to 1 sloping ratio what does the second one
represent - Answer-Depth or vertical rise
On a track machine the gears should be where - Answer-
In the rear
When load leveling when do you deploy your stabilizes or
load levelers before or after you make the lift - Answer-
Before you make your lift
When backfilling an excavation you should use a -
Answer-Small lift shade the ditch
In the state of Massachusetts what criteria require a
hoisting license - Answer-The weight of the load exceeds
500 pounds the height of the load exceeds 10 feet the
capacity of the bucket exceeds 1/4 cubic yard
,2|Page
What type of safety system is used on de energized
circuits - Answer-Lockout tagout total de energization
system
In what time frame must the department of Public Safety
be notified of a death involving hoisting equipment -
Answer-Within 1 hour
How many pounds in a ton - Answer-2,000lbs
All welding and cutting on hoisting equipment shall be
done in accordance with the requirements of what? -
Answer-American welding society formerly of the
American Society of mechanical engineers
What action dose the signal person intend the operator
perform if he extends his arm at shoulder height, makes a
fist with his hand and sticks his thumb up - Answer-Boom
up
What type of protection should be given to operators of
material handling and moving equipment - Answer-
, 3|Page
Protection from the weather safety shatter proof glass heat
in cold weather overhead protection
What law governs hoisting equipment in the state of
Massachusetts - Answer-Chapter 146 of the general laws
520 CMR section 6
How do you test the load brake on a LULL - Answer-Lift
the load just off the ground and return the boom handle to
neutral position
How do you find the weight of a load - Answer-Shipping
papers data tags use a scale to weigh load calculate the
weight
What must be stamped on all load rating plates - Answer-
Serial number of the lifting unit
The boom of the unit you are operating comes in contact
with and energized power line there's no sign of any other
dangers such as fire what should you do - Answer-Stay in
the cab until the lines are de-energized