SKILLS USA DISTRICT WELDING EXAM 2026/2027 – Complete Questions and Correct Answers | Welding Certification Study Guide

SKILLS USA DISTRICT WELDING

EXAM QUESTIONS WITH CORRECT
ANSWERS 2026/2027 LATEST UPDATE



A machine has a duty cycle of 300 Amps @ 20%. How long can you weld at
300 Amps continuously before the machine shuts down? - VERRIFIED
ANSWERS✔◻✔◻--2

Minutes




What SMAW rod is know as the 'Code Rod'? - VERRIFIED
ANSWERS✔◻✔◻--E7018




What is the device inside the power supply that changes AC to DC? -
VERRIFIED ANSWERS✔◻✔◻--Rectifier



In most inverters, what is used to increase the frequency of the incoming line
signal of


Page 1 of 23

,50/60 Hz up to that of the inverter at 20,000 Hz? - VERRIFIED
ANSWERS✔◻✔◻--

IGBT

To reduce the risk of hydrogen cracking, which electrode would you select? -

VERRIFIED ANSWERS✔◻✔◻--E7018



What is not a safety concern when welding with the SMAW process? -
VERRIFIED ANSWERS✔◻✔◻--None of the above



An IGBT is called what? - VERRIFIED ANSWERS✔◻✔◻--Isolated Gate
Bipolar



Transistor




In SMAW welding, what does "Hot Start" do? - VERRIFIED
ANSWERS✔◻✔◻--



Provides an additional boost of current when striking the arc.




Page 2 of 23

, Notch toughness is on requirements for some structural applications especially
those in seismic areas. What does notch toughness do? - VERRIFIED
ANSWERS✔◻✔◻--

Welds of high notch toughness have greater resistance to cracking due to
rapidly



applied loads.




For improved impact properties, select the correct electrode? - VERRIFIED

ANSWERS✔◻✔◻--E7018-1



What electrode is not used to weld vertical down? - VERRIFIED
ANSWERS✔◻✔◻-- E7018



What does SMAW stand for? - VERRIFIED ANSWERS✔◻✔◻--Shielded
Metal Arc Welding




The majority o SMAW welding is done using what two polarities? -
VERRIFIED

Page 3 of 23