Propane Test Exam UPDATED ACTUAL
QUESTIONS AND CORRECT ANSWERS
LP-Gas Code - CORRECT ANSWER NFPA 58 is also known as the...
Cylinder markings and labeling - CORRECT ANSWER Which of the following
subjects is covered in DOT regulations?
Personal Protective Equipment (PPE) - CORRECT ANSWER An important subject
covered in OSHA regulations is?
An information bulletin that alerts you to properties and health hazards of propane -
CORRECT ANSWER What is an MSDS?
Oderant - CORRECT ANSWER ________ is added to propane to increase the
likelihood that a leak will be detected.
Expand - CORRECT ANSWER Liquid propane will __________ when heat is added
to it.
80% - CORRECT ANSWER In order to allow for liquid expansion, propane containers
are typically filled to _____% of their capacity.
270 - CORRECT ANSWER Propane liquid released into the air will expand to
________ times its original volume.
Refrigerating effect - CORRECT ANSWER Gloves and other PPE are required when
filling containers because of the __________ of liquid propane.
An ignition source - CORRECT ANSWER The proper mixture of propane vapor, air
and __________ is needed fir propane to burn.
, Annually - CORRECT ANSWER OSHA requires employees to be trained on fire
extinguisher use immediately upon hiring and __________ thereafter.
Turned off - CORRECT ANSWER In an emergency where there is a propane fire,
flames should not be extinguished unless the fuel supply can be __________.
ASME storage tank - CORRECT ANSWER Most propane dispensers include a(n)
__________ that supplies propane to the dispensing equipment.
Operator - CORRECT ANSWER When filling a cylinder by volume using the fixed
maximum liquid level gage, the filling process relies on the __________ to determine when
the maximum permitted filling limit for a cylinder is reached.
Remote shutdown stations - CORRECT ANSWER Which of the following is used to
provide an additional level of emergency shutdown capability?
Certification decals - CORRECT ANSWER Platform balance beam scales must bear
__________
Shut down and secured - CORRECT ANSWER When the operator is not in attendance,
the dispenser should be __________
A break-away device - CORRECT ANSWER When filling mobile propane containers
that are permanently mounted on vehicles or RV's, dispensing equipment
Remain away from the immediate filling area - CORRECT ANSWER Because of the
inherent dangers when filling propanevcontainers, customers should be asked to __________
Footring - CORRECT ANSWER The __________ is a wide metal band welded or
brazed to the bottom of the cylinder body from corrosion or damage.
QUESTIONS AND CORRECT ANSWERS
LP-Gas Code - CORRECT ANSWER NFPA 58 is also known as the...
Cylinder markings and labeling - CORRECT ANSWER Which of the following
subjects is covered in DOT regulations?
Personal Protective Equipment (PPE) - CORRECT ANSWER An important subject
covered in OSHA regulations is?
An information bulletin that alerts you to properties and health hazards of propane -
CORRECT ANSWER What is an MSDS?
Oderant - CORRECT ANSWER ________ is added to propane to increase the
likelihood that a leak will be detected.
Expand - CORRECT ANSWER Liquid propane will __________ when heat is added
to it.
80% - CORRECT ANSWER In order to allow for liquid expansion, propane containers
are typically filled to _____% of their capacity.
270 - CORRECT ANSWER Propane liquid released into the air will expand to
________ times its original volume.
Refrigerating effect - CORRECT ANSWER Gloves and other PPE are required when
filling containers because of the __________ of liquid propane.
An ignition source - CORRECT ANSWER The proper mixture of propane vapor, air
and __________ is needed fir propane to burn.
, Annually - CORRECT ANSWER OSHA requires employees to be trained on fire
extinguisher use immediately upon hiring and __________ thereafter.
Turned off - CORRECT ANSWER In an emergency where there is a propane fire,
flames should not be extinguished unless the fuel supply can be __________.
ASME storage tank - CORRECT ANSWER Most propane dispensers include a(n)
__________ that supplies propane to the dispensing equipment.
Operator - CORRECT ANSWER When filling a cylinder by volume using the fixed
maximum liquid level gage, the filling process relies on the __________ to determine when
the maximum permitted filling limit for a cylinder is reached.
Remote shutdown stations - CORRECT ANSWER Which of the following is used to
provide an additional level of emergency shutdown capability?
Certification decals - CORRECT ANSWER Platform balance beam scales must bear
__________
Shut down and secured - CORRECT ANSWER When the operator is not in attendance,
the dispenser should be __________
A break-away device - CORRECT ANSWER When filling mobile propane containers
that are permanently mounted on vehicles or RV's, dispensing equipment
Remain away from the immediate filling area - CORRECT ANSWER Because of the
inherent dangers when filling propanevcontainers, customers should be asked to __________
Footring - CORRECT ANSWER The __________ is a wide metal band welded or
brazed to the bottom of the cylinder body from corrosion or damage.
