Sheet metal Final Year One Semester
One Latest 2026-2027. Questions and
Answers. Graded A
A brake rated as 1018 means that it can bend a piece of mild steel, the full
length of the brake, up to what gage material - ANS18
A hammer with a round face and beveled edges to avoid denting metal
surface is what hammer - ANSriveting
A machine that can cut bend punch and notch various shapes of metal is
called what - ANSiron worker
a specialized type of bar folder used to form drives is called a - ANScleat
bender
A type of machine that lays out and cuts patterns using a computer
software program is called what - ANSplasma
at what thickness is Black iron considered plate and not sheet - ANS1/4
inch
bids on a portion of a project - ANSsubcontractor
1
, Black iron stainless steel and galvanized iron are gauged by a system
called the US what gauge - ANSstandard
blades for snips can be classified as either what blade or what blade -
ANSstraight or combination
brakes have about how many percent less capacity for stainless steel
compared to mild steel - ANS50%
brass is gauged by what per square foot - ANSounces
Bronze is a combination of which metals - ANStin and copper
capacity of breaks is based on bending at least how wide of a flange on
mild steel - ANS1in
easy method to maintain duct elevations - ANSstory pole
evidence exists that this process was developed as early as the second
century by the Romans - ANSsoldering
follow directions - ANSapprentice
give the approximate thickness in inches of the following mild steel sheet
gauges 16,22,10 - ANS1/16,1/32,1/8
2
One Latest 2026-2027. Questions and
Answers. Graded A
A brake rated as 1018 means that it can bend a piece of mild steel, the full
length of the brake, up to what gage material - ANS18
A hammer with a round face and beveled edges to avoid denting metal
surface is what hammer - ANSriveting
A machine that can cut bend punch and notch various shapes of metal is
called what - ANSiron worker
a specialized type of bar folder used to form drives is called a - ANScleat
bender
A type of machine that lays out and cuts patterns using a computer
software program is called what - ANSplasma
at what thickness is Black iron considered plate and not sheet - ANS1/4
inch
bids on a portion of a project - ANSsubcontractor
1
, Black iron stainless steel and galvanized iron are gauged by a system
called the US what gauge - ANSstandard
blades for snips can be classified as either what blade or what blade -
ANSstraight or combination
brakes have about how many percent less capacity for stainless steel
compared to mild steel - ANS50%
brass is gauged by what per square foot - ANSounces
Bronze is a combination of which metals - ANStin and copper
capacity of breaks is based on bending at least how wide of a flange on
mild steel - ANS1in
easy method to maintain duct elevations - ANSstory pole
evidence exists that this process was developed as early as the second
century by the Romans - ANSsoldering
follow directions - ANSapprentice
give the approximate thickness in inches of the following mild steel sheet
gauges 16,22,10 - ANS1/16,1/32,1/8
2
