IICRC UFT EXAM 2026 WITH ACTUAL
CORRECT QUESTIONS ANDVERIFIED
DETAILED ANSWERS|FREQUENTLY TESTED
QUESTIONS AND SOLUTIONS |ALREADY
GRADED A+|NEWEST|GUARANTEED
PASS|BRAND NEW VERSION!!
Rust removers based on ______________ _____ can ________ skin and damage material
surfaces.
Hydrofluoric Acid
Burn
To agitate a spotting agent into a fabric and not distort the fabric, use a __________ _______
and tamp with an _____ and _______ motion.
Tamping Brush
Up and Down
Ultraviolet (UV) light, called "black light", will illuminate many soils; for example, _______ glows
under UV light.
Urine
Fabrics can re-soil or spots reappear when soils or spotting chemicals are not _________
_____________ .
Removed Completely
Remove grease spots by applying a ________ ____ ______, tamp, then _______ with a towel.
Volatile Dry Solvent
Blot
1|Page
,After spotting with an acid rust remover, _________ thoroughly with a product to neutralize,
according to product _______ directions.
Rinse
Label
Both silicone-based and fluorochemical-based protectors resist water spills, but only the
_____________________-based protector repels oily spills.
Fluorochemical
Hard water interacts with some cleaning products and reduces their _____________
Effectiveness
The effective tool to use to remove pills from fabrics is the __________ ________.
Electric Shaver
. To vacuum hard to reach areas, attach a ___________ ______ to the vacuum hose.
Crevice Tool
The brush used when cleaning velvet fabrics is called the __________ brush or ________ brush.
Carding
Velvet
Finishing
Electrical equipment must be properly ____________ for safety protection.
Grounded
When mixing cleaning products, check the product label for recommended ___________ ratios.
Dilution
The IICRC Standard for upholstery cleaning is identified as the ______ Standard
S300
2|Page
, Protect the customer's flooring when you clean upholstery on location by placing the items to
be cleaned on a _______ ______.
Drop Cloth
Protect the platform (deck) of the upholstery from watermarks by ____________ the surface.
Evenly wet
Dampening
Before you begin cleaning, qualify the job by talking with the customer about the results of
_____ __________________ and _________.
Your Inspection
Tests
When you clean upholstery on location, clean the cushions on a ______ ______ or on
__________ ______ and a work table.
Drop Cloth
Colorfast Paper
When using vacuum strokes to remove moisture from fabrics, focus on the ______ and ______ ,
which are often over wetted.
Seams
Welts
Buttons
Piping
After cleaning cushions, position them so they dry without color bleeding by leaning them on
_____ ______ or ________ and in an inverted ____ frame.
Drop Cloths
Paper
V
3|Page
CORRECT QUESTIONS ANDVERIFIED
DETAILED ANSWERS|FREQUENTLY TESTED
QUESTIONS AND SOLUTIONS |ALREADY
GRADED A+|NEWEST|GUARANTEED
PASS|BRAND NEW VERSION!!
Rust removers based on ______________ _____ can ________ skin and damage material
surfaces.
Hydrofluoric Acid
Burn
To agitate a spotting agent into a fabric and not distort the fabric, use a __________ _______
and tamp with an _____ and _______ motion.
Tamping Brush
Up and Down
Ultraviolet (UV) light, called "black light", will illuminate many soils; for example, _______ glows
under UV light.
Urine
Fabrics can re-soil or spots reappear when soils or spotting chemicals are not _________
_____________ .
Removed Completely
Remove grease spots by applying a ________ ____ ______, tamp, then _______ with a towel.
Volatile Dry Solvent
Blot
1|Page
,After spotting with an acid rust remover, _________ thoroughly with a product to neutralize,
according to product _______ directions.
Rinse
Label
Both silicone-based and fluorochemical-based protectors resist water spills, but only the
_____________________-based protector repels oily spills.
Fluorochemical
Hard water interacts with some cleaning products and reduces their _____________
Effectiveness
The effective tool to use to remove pills from fabrics is the __________ ________.
Electric Shaver
. To vacuum hard to reach areas, attach a ___________ ______ to the vacuum hose.
Crevice Tool
The brush used when cleaning velvet fabrics is called the __________ brush or ________ brush.
Carding
Velvet
Finishing
Electrical equipment must be properly ____________ for safety protection.
Grounded
When mixing cleaning products, check the product label for recommended ___________ ratios.
Dilution
The IICRC Standard for upholstery cleaning is identified as the ______ Standard
S300
2|Page
, Protect the customer's flooring when you clean upholstery on location by placing the items to
be cleaned on a _______ ______.
Drop Cloth
Protect the platform (deck) of the upholstery from watermarks by ____________ the surface.
Evenly wet
Dampening
Before you begin cleaning, qualify the job by talking with the customer about the results of
_____ __________________ and _________.
Your Inspection
Tests
When you clean upholstery on location, clean the cushions on a ______ ______ or on
__________ ______ and a work table.
Drop Cloth
Colorfast Paper
When using vacuum strokes to remove moisture from fabrics, focus on the ______ and ______ ,
which are often over wetted.
Seams
Welts
Buttons
Piping
After cleaning cushions, position them so they dry without color bleeding by leaning them on
_____ ______ or ________ and in an inverted ____ frame.
Drop Cloths
Paper
V
3|Page
