AND ANSWERS 100% VERIFIED.
When the clutch is fully depressed, it means that the power from the engine is
A. Transmitted to the wheels.
B. Partially transmitted to the wheels.
C. Not transmitted to the wheels - Correct Answers C
Excessive or uneven tyre wear can be caused by faults in the:
A. exhaust system
B. gearbox
C. suspension - Correct Answers C
A person will not be allowed to register for a test if he has accumulated
A. 13 demerit points.
B. 12 demerit points.
C. 10 demerit points. - Correct AnswersA
If your view is blocked while reversing, you should
A. sound the horn as you reverse.
B. stop and wait until the obstruction is cleared.
C. seek help. - Correct AnswersC
You are reversing your vehicle into a side road. When would the greatest hazard be to the passing
traffic?
A. After you have entered the side road.
B. After you have completed the manoeuvre.
C. When the front of your vehicle swings out. - Correct AnswersC
, To maintain a steady speed while negotiating a mild bend, you should
A. apply half-clutch.
B. depress the accelerator pedal lightly.
C. apply brake lightly. - Correct AnswersB
Your vehicle pulls to one side when braking, you should
A. change the tyres around.
B. consult your mechanic as soon as possible.
C. pump the pedal when braking. - Correct AnswersB
Aquaplaning is a condition where the tyres lose contact with the road surface, which results in a loss of
A. clutch control.
B. steering control and braking efficiency.
C. gear control and accelerating efficiency - Correct AnswersB
Less braking effort is required when you stop your vehicle using
A. 3rd gear.
B. 4th gear.
C. 2nd gear. - Correct AnswersC
When the accelerator pedal is released, there will be
A. no change in the engine revolutions.
B. an increase in the engine revolutions.
C. a reduction in the engine revolutions. - Correct AnswersC
When can you use the right lane of a two-lane carriageway?
A. When your speed is higher that the speed limit for the road.
B. When your path of travel is obstructed by road works or parked vehicles.