Page 1 of 47
ASME SECTION IX CLOSED BOOK 2026
PRACTICE EXAM COMPLETE (147) CURRENT
TESTING QUESTIONS AND DETAILED CORRECT
ANSWERS|GUARANTEED PASS.
ASME
Prepare for the ASME Section IX Closed Book Practice Exam with
this concise study resource covering welding qualifications,
procedure specifications, and code compliance. It reinforces
key concepts aligned with standards from the American Society
of Mechanical Engineers. Designed to support effective
preparation and test readiness. Suitable for welders, inspectors,
and professionals preparing for ASME Section IX qualification
exams.
The purpose of the WPS and PQR is to determine that:
A. the welder is qualified
B. the base metals are strong enough
C. the weldment has the desired properties
D. the skill of the welder ✓ ✓ ...... ANSWER ....... C
The WPS lists:
, Page 2 of 47
A. nonessential variables
B. essential variables
C. ranges for 1 & 2 above
D. all of the above ✓ ✓ ...... ANSWER ....... D
The PQR must list:
A. essential variables
B. qualification test & examination results
C. supplementary essential variables (when notch
toughness is required)
D. all of the above ✓ ✓ ...... ANSWER ....... D
What is the earliest Edition of Section IX recognized by the
current edition?
A. 1958
B. 1992
C. 1987
D. 1962 ✓ ✓ ...... ANSWER ....... D
, Page 3 of 47
New Welding Procedure Specifications must meet the
______________ Edition and Addenda of Section IX.
A.1962
B. current
C. 1986
D. 1995 ✓ ✓ ...... ANSWER ....... B
Each _________________ shall conduct the tests required by
Section IX to qualify the WPS's used during the construction,
alteration, or repair.
A. Welder or welding operator
B. Manufacturer or contractor
C. Inspector
D. All of the above ✓ ✓ ...... ANSWER ....... B
The records of procedure, welder and welding operator
qualification must be available to the _______________ .
A. Manufacturer
B. Welder
C. Authorized Inspector
, Page 4 of 47
D. Foreman ✓ ✓ ...... ANSWER ....... C
A welder qualifying with a groove weld in plate in the 4G
position is qualified to weld groove welds in plate and pipe
over 24"O.D. in at least the _________ positions.
A. Vertical
B. Flat & horizontal
C. Flat & overhead
D. Horizontal ✓ ✓ ...... ANSWER ....... C
A welder qualifying with plate fillet welds in the 3F and 4F
positions is qualified to weld groove welds in plate in the
_______________ positions.
A. Flat only
B. Flat and horizontal
C. Flat and vertical
D. None of the above ✓ ✓ ...... ANSWER ....... D
A welder qualifying by making a groove weld on pipe with an
O.D. of 3/4" in the 5G position is qualified to weld groove
welds in:
ASME SECTION IX CLOSED BOOK 2026
PRACTICE EXAM COMPLETE (147) CURRENT
TESTING QUESTIONS AND DETAILED CORRECT
ANSWERS|GUARANTEED PASS.
ASME
Prepare for the ASME Section IX Closed Book Practice Exam with
this concise study resource covering welding qualifications,
procedure specifications, and code compliance. It reinforces
key concepts aligned with standards from the American Society
of Mechanical Engineers. Designed to support effective
preparation and test readiness. Suitable for welders, inspectors,
and professionals preparing for ASME Section IX qualification
exams.
The purpose of the WPS and PQR is to determine that:
A. the welder is qualified
B. the base metals are strong enough
C. the weldment has the desired properties
D. the skill of the welder ✓ ✓ ...... ANSWER ....... C
The WPS lists:
, Page 2 of 47
A. nonessential variables
B. essential variables
C. ranges for 1 & 2 above
D. all of the above ✓ ✓ ...... ANSWER ....... D
The PQR must list:
A. essential variables
B. qualification test & examination results
C. supplementary essential variables (when notch
toughness is required)
D. all of the above ✓ ✓ ...... ANSWER ....... D
What is the earliest Edition of Section IX recognized by the
current edition?
A. 1958
B. 1992
C. 1987
D. 1962 ✓ ✓ ...... ANSWER ....... D
, Page 3 of 47
New Welding Procedure Specifications must meet the
______________ Edition and Addenda of Section IX.
A.1962
B. current
C. 1986
D. 1995 ✓ ✓ ...... ANSWER ....... B
Each _________________ shall conduct the tests required by
Section IX to qualify the WPS's used during the construction,
alteration, or repair.
A. Welder or welding operator
B. Manufacturer or contractor
C. Inspector
D. All of the above ✓ ✓ ...... ANSWER ....... B
The records of procedure, welder and welding operator
qualification must be available to the _______________ .
A. Manufacturer
B. Welder
C. Authorized Inspector
, Page 4 of 47
D. Foreman ✓ ✓ ...... ANSWER ....... C
A welder qualifying with a groove weld in plate in the 4G
position is qualified to weld groove welds in plate and pipe
over 24"O.D. in at least the _________ positions.
A. Vertical
B. Flat & horizontal
C. Flat & overhead
D. Horizontal ✓ ✓ ...... ANSWER ....... C
A welder qualifying with plate fillet welds in the 3F and 4F
positions is qualified to weld groove welds in plate in the
_______________ positions.
A. Flat only
B. Flat and horizontal
C. Flat and vertical
D. None of the above ✓ ✓ ...... ANSWER ....... D
A welder qualifying by making a groove weld on pipe with an
O.D. of 3/4" in the 5G position is qualified to weld groove
welds in:
