NEW ACTUAL EXAM FOR IICRC Water Damage Restoration
(WRT) Certification ,Technician , Training Manual Practice Exam ||
Most Recent Exam Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Guaranteed Success!!
Newest Exam | Just Released 2026-2027
Standard of care for the water restoration profession
IICRC S500
All ___ is fungi but not all fungi is ___.
mold
____ is to transform an abnormally wet, potentially damaged structure into an
environment of equal or better appearance.
Goal of restorative process
_____ Identify all affected materials
Assessment (1 of restorative drying process)
,_____ Documents what types of materials have been affected. Must evaluate
materials
against 3 criteria to identify if should be replaced or restored.
1) degree of containment
2) damage to item
3) replacement cost versus restoration cost
Documentation (2 of restorative drying process)
Causing or able to cause disease
pathogenic
1 Gallon = __.34 pounds (8 is always weight)
8
Two drying methods:
1) _________ "d for demolition"
2) Aggressive
Disruptive
a) more contaminated
b) more damaged
c) replacing is cheaper
Disruptive - drying method
,"DRYING IN PLACE" / little to no manipulation
a) less contaminated
b) less damaged
c) replacing is COSTLY
d) can ONLY be used w/ category 1
Aggressive - drying method
1) Humidity
2) Air flow
3) Temperature
Drying Pie (3)
Vapor pressure always goes from to low.
High
1) Safety/ Health
2) Document & Inspect
3) Mitigate Further Damage
4) Clean and Dry Affected Areas
5) Complete Restoration and Repairs
Principles of Drying
The technician's FIRST responsibility when arriving at a water damage site is
to identify and eliminate _.
Safety hazards
, First line of defense against safety hazards is _. 2nd is to identify the presence
of
regulated building materials (asbestos, lead, PCBs)
Safety Awareness
Elimination
Substitution
Engineering
Controls
Administrative
Controls PPE (LEAST
EFFECTIVE)
Hierarchy of Controls
Last line of defense is ____
PPE
An agreement between the building owner and the restoration contractor. The
form specifies who is responsible for payment and the terms of payment
Work Authorization Form
materially interested parties
MIP
A non-invasive (non-penetrating) __ tracks the migration of water below hard
finish
surfaces, such as under vinyl tile or ceramic tile
Moisture meter
(WRT) Certification ,Technician , Training Manual Practice Exam ||
Most Recent Exam Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Guaranteed Success!!
Newest Exam | Just Released 2026-2027
Standard of care for the water restoration profession
IICRC S500
All ___ is fungi but not all fungi is ___.
mold
____ is to transform an abnormally wet, potentially damaged structure into an
environment of equal or better appearance.
Goal of restorative process
_____ Identify all affected materials
Assessment (1 of restorative drying process)
,_____ Documents what types of materials have been affected. Must evaluate
materials
against 3 criteria to identify if should be replaced or restored.
1) degree of containment
2) damage to item
3) replacement cost versus restoration cost
Documentation (2 of restorative drying process)
Causing or able to cause disease
pathogenic
1 Gallon = __.34 pounds (8 is always weight)
8
Two drying methods:
1) _________ "d for demolition"
2) Aggressive
Disruptive
a) more contaminated
b) more damaged
c) replacing is cheaper
Disruptive - drying method
,"DRYING IN PLACE" / little to no manipulation
a) less contaminated
b) less damaged
c) replacing is COSTLY
d) can ONLY be used w/ category 1
Aggressive - drying method
1) Humidity
2) Air flow
3) Temperature
Drying Pie (3)
Vapor pressure always goes from to low.
High
1) Safety/ Health
2) Document & Inspect
3) Mitigate Further Damage
4) Clean and Dry Affected Areas
5) Complete Restoration and Repairs
Principles of Drying
The technician's FIRST responsibility when arriving at a water damage site is
to identify and eliminate _.
Safety hazards
, First line of defense against safety hazards is _. 2nd is to identify the presence
of
regulated building materials (asbestos, lead, PCBs)
Safety Awareness
Elimination
Substitution
Engineering
Controls
Administrative
Controls PPE (LEAST
EFFECTIVE)
Hierarchy of Controls
Last line of defense is ____
PPE
An agreement between the building owner and the restoration contractor. The
form specifies who is responsible for payment and the terms of payment
Work Authorization Form
materially interested parties
MIP
A non-invasive (non-penetrating) __ tracks the migration of water below hard
finish
surfaces, such as under vinyl tile or ceramic tile
Moisture meter
