QUESTIONS WITH 100 PERCENT CORRECT
COMPREHENSIVE STUDY GUIDE 2026
QUESTIONS WITH VERIFIED ANSWERS
GRADED A+
⩥ Boiling. Answer: When water flows upward into the bottom of the
cut. A high water table is one of the causes of boiling.
⩥ Trench width and depth. Answer: Determines the load that the pipe
has to support once backfilling is complete
⩥ Thrust blocks. Answer: Designed by engineers, help restrain the
forces in an underground piping system
⩥ Excavate bell holes. Answer: For each pipe joint
⩥ Trenchless pipelaying. Answer: The general name for methods of
burying pipe lines that do not involve digging trenches
⩥ Boring to run plastic pipeline through the ground. Answer: A weak
link must be used when mechanically pulling polyethylene pipe
, ⩥ Hairpin. Answer: A large steel hook that slides into the pipe from one
end to lift the pipe
⩥ Stacking Pipe. Answer: Stack all the pipe on timbers or elevated
concrete supports to keep the bottom layer off the ground
⩥ Always plays Timbers. Answer: Between layers
⩥ Concrete Pipes. Answer: Should be stored or stacked as close to the
installation area as possible. Set the pipe on blocks placed under the pipe
barrel tude avoid damaging the ends.
⩥ Cast iron soil, pipe, and fittings. Answer: Do not leak or absorb water,
they are easily cut and joined.
⩥ Major disadvantage of cast-iron pipe. Answer: It is very heavy
material with low, tensile strength, and is easily broken when
mishandled.
⩥ Cast iron soil pipe is available in three basic types,. Answer: single
hub soil pipe, double hub soil pipe, and hubless soil pipe
⩥ Bell and spigot Pipe. Answer: Currently available in two different
wall thickness is or weights: service weight an extra heavy weight.