Rigging Test Questions and answers| Already Graded 100% Pass| Latest update 2026/2027

Rigging Test Questions and answers| Already Graded 100% Pass| Latest update 2026/2027 operator a signal person must be provided when the point of operation, meaning the load travel or the area near or at load placement is not in full view of the: dedicated spotter when the equipment is travelling and the view in the direction of travel is obstructed, a ____________ must be provided notify the crane who the signal is for For each signal, prior to giving the function/direction, the signal person must: signal person, operator, lift director When non-standard signals are used, the following people must contact each other prior to the lift operation and agree upon the non-standard signals which are going to be used: distance, function, direction which of the following are the three required elements of a voice signal? as many as are required per the lift plan How many persons may share a dedicated channel for the purpose of coordinating operations? proximity alarms which of the following are set to give the operator sufficient warning to prevent encroachment of power lines? effective, clear, and reliable when using electronic transmission devices, the transmitted signal must be: blocks installed at contact points to ensure that correct sling angles are maintained during choker hitch use, the sling may have: jaw and weldless eye A turnbuckle to be used in hoisting or rigging operations should be of what type construction? turnbuckle the attached drawing illustrates a device for adjustment of load and is termed a: find the center of gravity when lifting an object that is of irregular shape, you must always: the operator and signal person who is allowed to design a new signal system? site conditions preclude the use of hand, voice, or audio systems en an a new signal system be used? the operator, signal person, and lift director who determines if a new signal system is suitable?