UA Rigging Exam| Questions and 100% correct answers| Latest Update

UA Rigging Exam| Questions and 100% correct answers| Latest Update rope should be light in color with a silvery or pearl luster and a waxy surface. Manila Polypropylene rope is about ___ times stronger than manila rope. 1 3/4 ___ rope is manufactured in "film" form rather than extruded filaments and then shredded into fine strips to form fibers. Mylar Sizes of rope used in the piping industry are designated as ___. diameters A ___ distorts and crushes rope fibers, causing fatigue and rapid wear of the rope. hockle To properly handle and care for rope, use at least a ___-to-one safety factor based on the minimum breaking strength of rope. five If thimbles are loose in the eyes when inspecting a fiber rope, ___ the eyes to tighten the thimbles. sieze It is common practice to make ___ whippings before cutting a rope and to cut between the whippings, eliminating the possibility of them unraveling. two Even with a new rope, a splice, regardless of the type, reduces the load-carrying ability of the rope by ___ percent. 10 to 15 A(n) ___ knot is the first step in making a back splice. crown A knot has only ___ percent of the strength of the rope. 50 to 60