OSHA 10 FINAL EXAM QUESTIONS
AND VERIFIED ANSWERS
GUARANTEED SUCCESS!!!
What are two US government agencies that are good resources for safety
and health information? - ANSWER- OSHA and NIOSH
OSHA requires fall protection when working near the edge of a trench
or excavation that is _________ or more in depth. - ANSWER- 6 feet
3. Every supported scaffold and its components must support, without
failure, its own weight and at least _______ the intended load. -
ANSWER- 4 times
4. During an OSHA inspection: - ANSWER- You have the right to talk
to the inspector privately
5. The OSHA standards for Construction and General Industry are found
in: - ANSWER- Parts 1926 and 1910
, 6. When the employer receives an OSHA citation, it must be: -
ANSWER- Posted for 3 days or until the violation is fixed
7. What does OSHA require employers to post for 3 days? - ANSWER-
OSHA citations and abatement verification notices
8. What section of the OSH Act does the Whistleblower Program
reference? - ANSWER- Section 11(c)
9. OSHA requires fall protection at different heights for construction and
general industry however, regardless of the fall distance, which of the
following is most - ANSWER- A. Fall protection must be provided
when working over dangerous equipment
B. Fall protection must be provided when working over dangerous
machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - ANSWER- It
is determined to have strength and structural integrity to support
intended loads
11. From your choices below, what would you consider to be a "major"
fall hazard in construction? - ANSWER- A. Roof edges and floor
openings
B. Steel erection
AND VERIFIED ANSWERS
GUARANTEED SUCCESS!!!
What are two US government agencies that are good resources for safety
and health information? - ANSWER- OSHA and NIOSH
OSHA requires fall protection when working near the edge of a trench
or excavation that is _________ or more in depth. - ANSWER- 6 feet
3. Every supported scaffold and its components must support, without
failure, its own weight and at least _______ the intended load. -
ANSWER- 4 times
4. During an OSHA inspection: - ANSWER- You have the right to talk
to the inspector privately
5. The OSHA standards for Construction and General Industry are found
in: - ANSWER- Parts 1926 and 1910
, 6. When the employer receives an OSHA citation, it must be: -
ANSWER- Posted for 3 days or until the violation is fixed
7. What does OSHA require employers to post for 3 days? - ANSWER-
OSHA citations and abatement verification notices
8. What section of the OSH Act does the Whistleblower Program
reference? - ANSWER- Section 11(c)
9. OSHA requires fall protection at different heights for construction and
general industry however, regardless of the fall distance, which of the
following is most - ANSWER- A. Fall protection must be provided
when working over dangerous equipment
B. Fall protection must be provided when working over dangerous
machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - ANSWER- It
is determined to have strength and structural integrity to support
intended loads
11. From your choices below, what would you consider to be a "major"
fall hazard in construction? - ANSWER- A. Roof edges and floor
openings
B. Steel erection
