ASNT Level III Basic exam—— Exam Fully Solved
& Updated 2026(latest version verified for
accuracy) ( Complete Questions and Detailed
Answers) 100% Graded A+
work with a NDT Level I or Level II PT person. - ANSWER✔✔SNT-TC-1A
recommends that an individual in the process of being qualified to
liquid penetrant NDT Level I should:
may accept an ASNT Level III certification to satisfy part of the
qualification requirements. - ANSWER✔✔When certifying NDT Level III
personnel to SNT-TC-1A, the employer:
written testimony verifying their qualification in a method. -
ANSWER✔✔In accordance with SNT-TC-1A, certification is defined as
indicating that a person has:
be capable of developing, qualifying, and approving procedures. -
ANSWER✔✔According to SNT-TC-1A an NDT Level III individual should:
copies of last certification company examinations. - ANSWER✔✔Which
of the following items would not be needed in the qualification records
of a SNT-TC-1A program?
does not have to be qualified as in CP-189. - ANSWER✔✔According to
SNT-TC-1A, the NDT instructor:
,equipment, operating procedures and NDT techniques that an
individual may encounter during specific assignments. - ANSWER✔✔In
accordance with SNT-TC-1A, specific examinations should include
questions which cover:
approved by the employer's designated Level III - ANSWER✔✔A CP-
189 certification procedure shall be:
pass a final exam. - ANSWER✔✔If aLevel II candidate wishes to use a
40 hours NDT Training Course for qualification towards CP-189
certification, they must:
must posses a current valid ASNT NDT Level III Certificate in the
applicable method. - ANSWER✔✔A requirement for a CP-189 Level III
certification is that the candidate:
NDT Instructor. - ANSWER✔✔Which qualification is addressed in CP-
189 but n9t SNT-TC-1A?
be verified for initial and continuing experience. - ANSWER✔✔CP-189
requires experience records to:
expires. - ANSWER✔✔When a Level III retires, his/her certification in
accordance with CP-189:
the candidate must meet the required minimum hours in each method
and the total hours in NDT for the method requiring the most total
hours - ANSWER✔✔CP-189 states, when a candidate for certification is
, working in two methods of NDT:
that the employer designated a principal NDT Level III for that
method. - ANSWER✔✔When an employer has more than one NDT
Level III in a specific method, CP-189 requires:
a current ASNT NDT Level III certificate in the same method. -
ANSWER✔✔Level III recertification in accordance with CP-189
requires:
have 10 years or more of experience as a Level II in the method they
instructor. - ANSWER✔✔One requirements of CO-189 for instructors is:
Bench and yoke test must each be demonstrated. - ANSWER✔✔To
meet CP-189, what MT test techniques must be satisfactory
demonstrated in a Level I practical examination in order to qualify an
individual whose job will require performing both bench and yoke
examinations?
be a holder of a current ASNT Level III certificate in the method. -
ANSWER✔✔ CP-189 requires the NDT Level III, responsible for
administration and grading of NDT examinations must:
refer the incident to the ASNT Certification Management Council
Ethics Subcommittee. - ANSWER✔✔An ASNT Level III, locking for
employment, alters his certificate and is reported to ASNT
headquarters. ASNT Headquarters would most likely:
& Updated 2026(latest version verified for
accuracy) ( Complete Questions and Detailed
Answers) 100% Graded A+
work with a NDT Level I or Level II PT person. - ANSWER✔✔SNT-TC-1A
recommends that an individual in the process of being qualified to
liquid penetrant NDT Level I should:
may accept an ASNT Level III certification to satisfy part of the
qualification requirements. - ANSWER✔✔When certifying NDT Level III
personnel to SNT-TC-1A, the employer:
written testimony verifying their qualification in a method. -
ANSWER✔✔In accordance with SNT-TC-1A, certification is defined as
indicating that a person has:
be capable of developing, qualifying, and approving procedures. -
ANSWER✔✔According to SNT-TC-1A an NDT Level III individual should:
copies of last certification company examinations. - ANSWER✔✔Which
of the following items would not be needed in the qualification records
of a SNT-TC-1A program?
does not have to be qualified as in CP-189. - ANSWER✔✔According to
SNT-TC-1A, the NDT instructor:
,equipment, operating procedures and NDT techniques that an
individual may encounter during specific assignments. - ANSWER✔✔In
accordance with SNT-TC-1A, specific examinations should include
questions which cover:
approved by the employer's designated Level III - ANSWER✔✔A CP-
189 certification procedure shall be:
pass a final exam. - ANSWER✔✔If aLevel II candidate wishes to use a
40 hours NDT Training Course for qualification towards CP-189
certification, they must:
must posses a current valid ASNT NDT Level III Certificate in the
applicable method. - ANSWER✔✔A requirement for a CP-189 Level III
certification is that the candidate:
NDT Instructor. - ANSWER✔✔Which qualification is addressed in CP-
189 but n9t SNT-TC-1A?
be verified for initial and continuing experience. - ANSWER✔✔CP-189
requires experience records to:
expires. - ANSWER✔✔When a Level III retires, his/her certification in
accordance with CP-189:
the candidate must meet the required minimum hours in each method
and the total hours in NDT for the method requiring the most total
hours - ANSWER✔✔CP-189 states, when a candidate for certification is
, working in two methods of NDT:
that the employer designated a principal NDT Level III for that
method. - ANSWER✔✔When an employer has more than one NDT
Level III in a specific method, CP-189 requires:
a current ASNT NDT Level III certificate in the same method. -
ANSWER✔✔Level III recertification in accordance with CP-189
requires:
have 10 years or more of experience as a Level II in the method they
instructor. - ANSWER✔✔One requirements of CO-189 for instructors is:
Bench and yoke test must each be demonstrated. - ANSWER✔✔To
meet CP-189, what MT test techniques must be satisfactory
demonstrated in a Level I practical examination in order to qualify an
individual whose job will require performing both bench and yoke
examinations?
be a holder of a current ASNT Level III certificate in the method. -
ANSWER✔✔ CP-189 requires the NDT Level III, responsible for
administration and grading of NDT examinations must:
refer the incident to the ASNT Certification Management Council
Ethics Subcommittee. - ANSWER✔✔An ASNT Level III, locking for
employment, alters his certificate and is reported to ASNT
headquarters. ASNT Headquarters would most likely:
