EICA Crane Certification test study guide
Study online at https://quizlet.com/_7n4f9i
1. OSHA 1926 applies to construction law
2. OSHA 1926-1400 sub part CC Construction law pertaining to
cranes
3. ASME B30.5 Mobile and Locomotive cranes
4. ASME B30.9 standard on slings
5. ASME B30.10 standard on hooks
6. ASME B30.23 standard on personnel lifting sys-
tems
7. ASME B30.26 standard on rigging hardware
8. OSHA 1910 applies to general industry and mainte-
nance
9. ASME B30.15 standard on mobile hydraulic
cranes
10. OSHA 1926 .1422 applies to Signals- hand signal chart
11. OSHA 1926 .1431 applies to hoisting personnel
12. crane jib is "stowed" jib is attached to crane boom
13. crane jib is "stored" jib is not on truck
14. crawler crane crane mounted on two tracks
15. rough terrain crane wheel mounted mobile crane with
large tires for soft and moderately
uneven terrain
, EICA Crane Certification test study guide
Study online at https://quizlet.com/_7n4f9i
16. all terrain crane wheel mounted crane capable of
traveling at highway speeds and
operating off road on a job site
17. hydraulic boom raised, lowered extended and re-
tracted using hydraulics
18. lattice boom boom constructed of one or more
sections of thin steel gridwork
19. floats flat, rigid metal foot of an outrig-
ger
20. outrigger structure that extends to contact
the ground with a large pad to
provide additional stability
21. matting large, flat, square or rectangular
support material that cranes can
easily drive on to access a job site
22. counterweight a block of dense material attached
to one end of a structure in order
to offset the moment force of the
weight attached to the other end
of the structure
23. hoist hook a curved implement used to
quickly and temporarily connect
rigging to a load or lifting equip-
ment
24. boom tip platform
Study online at https://quizlet.com/_7n4f9i
1. OSHA 1926 applies to construction law
2. OSHA 1926-1400 sub part CC Construction law pertaining to
cranes
3. ASME B30.5 Mobile and Locomotive cranes
4. ASME B30.9 standard on slings
5. ASME B30.10 standard on hooks
6. ASME B30.23 standard on personnel lifting sys-
tems
7. ASME B30.26 standard on rigging hardware
8. OSHA 1910 applies to general industry and mainte-
nance
9. ASME B30.15 standard on mobile hydraulic
cranes
10. OSHA 1926 .1422 applies to Signals- hand signal chart
11. OSHA 1926 .1431 applies to hoisting personnel
12. crane jib is "stowed" jib is attached to crane boom
13. crane jib is "stored" jib is not on truck
14. crawler crane crane mounted on two tracks
15. rough terrain crane wheel mounted mobile crane with
large tires for soft and moderately
uneven terrain
, EICA Crane Certification test study guide
Study online at https://quizlet.com/_7n4f9i
16. all terrain crane wheel mounted crane capable of
traveling at highway speeds and
operating off road on a job site
17. hydraulic boom raised, lowered extended and re-
tracted using hydraulics
18. lattice boom boom constructed of one or more
sections of thin steel gridwork
19. floats flat, rigid metal foot of an outrig-
ger
20. outrigger structure that extends to contact
the ground with a large pad to
provide additional stability
21. matting large, flat, square or rectangular
support material that cranes can
easily drive on to access a job site
22. counterweight a block of dense material attached
to one end of a structure in order
to offset the moment force of the
weight attached to the other end
of the structure
23. hoist hook a curved implement used to
quickly and temporarily connect
rigging to a load or lifting equip-
ment
24. boom tip platform
