Grand Central 201 Admin Exam 2026 || Most Recent Exam 2026
-2027 Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Newest
Exam | Just Released!!
In order for a bed request to have the status "Bed Ready",
which of the following must be true about the assigned bed?
Choose ALL that apply.
It must be clean.
It must be empty.
It must meet the conditions of the rule listed in the Skip
Approval Rule field. It must be free of outgoing transport
requests. - ANSWER -A, B, C, D. The bed must be clean, empty
and without outgoing transport: the conditions of the Skip
Approval Rule.
Bed Planning: What is a benefit of using patient contexts in
Bed Planning? -
ANSWER -Automatically filter the units in
Bed Planning.
Bed Planning: A bed request qualifies for the Ready to Plan
rule. On which tab in Bed Planning does the bed request
appear? (Choose only ONE.)
Upcoming
Unassigned
Assigned
,Completed - ANSWER -Unassigned
[Read: Exercise 2 - Test Your Bed Request
Automation and Status
Advancement
Settings].
Bed Planning: What type of record can you use to group one
or more units -
ANSWER -A unit
profile
Bed Planning: You want to create a unit profile that contains all
of the pediatric beds in your hospital. You would also like this
unit profile to be selected automatically when a bed planner
selects a bed request with service of pediatrics. Place the
following steps in order to accomplish this build. Use the same
step order as you did during the in-class activities. - ANSWER -
2_ Use the arrow buttons to move all pediatric units to the Units
section of the unit profile activity.
3_ Map the context Pediatrics to a rule that evaluates if a
bed request has a service of pediatrics. 1_ Create a unit
profile.
4_ Enter the patient context of pediatrics in bed planning set-up
on the Context Overrides tab.
5_ Enter the unit profile record in the Suggested units field in
Bed Planning Setup.
Transport & EVS: Explain what can be configured in a
Transport region -
, ANSWER
-
Transport & EVS:
You need to create a Transport cancel request called
"completed by nontransporter." How do you configure this?
Add "completed by non-transporter." to category list for item
TNP 305
Enter "completed by non-transporter." as an allowed cancel
reason in the region Enter "completed by non-transporter." as
an allowed cancel reason in the Hospital
Add "completed by non-transporter." to category list for item
TNP 300 - ANSWER -Add "completed by non-transporter." to
category list for item TNP 305
Enter "completed by non-transporter." as an allowed cancel
reason in the region
Transport & EVS: What should transporter do when they can't
mark the request as In Progress yet, but will be able to do so
shortly?
Postpone the request
Delay the request
Cancel the request
Create a new request - ANSWER -Delay the request [This will
keep the request assigned to them].
Transport & EVS: Configure stages for multi-stage cleans -
ANSWER -Logistics Task Setup.
-2027 Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Newest
Exam | Just Released!!
In order for a bed request to have the status "Bed Ready",
which of the following must be true about the assigned bed?
Choose ALL that apply.
It must be clean.
It must be empty.
It must meet the conditions of the rule listed in the Skip
Approval Rule field. It must be free of outgoing transport
requests. - ANSWER -A, B, C, D. The bed must be clean, empty
and without outgoing transport: the conditions of the Skip
Approval Rule.
Bed Planning: What is a benefit of using patient contexts in
Bed Planning? -
ANSWER -Automatically filter the units in
Bed Planning.
Bed Planning: A bed request qualifies for the Ready to Plan
rule. On which tab in Bed Planning does the bed request
appear? (Choose only ONE.)
Upcoming
Unassigned
Assigned
,Completed - ANSWER -Unassigned
[Read: Exercise 2 - Test Your Bed Request
Automation and Status
Advancement
Settings].
Bed Planning: What type of record can you use to group one
or more units -
ANSWER -A unit
profile
Bed Planning: You want to create a unit profile that contains all
of the pediatric beds in your hospital. You would also like this
unit profile to be selected automatically when a bed planner
selects a bed request with service of pediatrics. Place the
following steps in order to accomplish this build. Use the same
step order as you did during the in-class activities. - ANSWER -
2_ Use the arrow buttons to move all pediatric units to the Units
section of the unit profile activity.
3_ Map the context Pediatrics to a rule that evaluates if a
bed request has a service of pediatrics. 1_ Create a unit
profile.
4_ Enter the patient context of pediatrics in bed planning set-up
on the Context Overrides tab.
5_ Enter the unit profile record in the Suggested units field in
Bed Planning Setup.
Transport & EVS: Explain what can be configured in a
Transport region -
, ANSWER
-
Transport & EVS:
You need to create a Transport cancel request called
"completed by nontransporter." How do you configure this?
Add "completed by non-transporter." to category list for item
TNP 305
Enter "completed by non-transporter." as an allowed cancel
reason in the region Enter "completed by non-transporter." as
an allowed cancel reason in the Hospital
Add "completed by non-transporter." to category list for item
TNP 300 - ANSWER -Add "completed by non-transporter." to
category list for item TNP 305
Enter "completed by non-transporter." as an allowed cancel
reason in the region
Transport & EVS: What should transporter do when they can't
mark the request as In Progress yet, but will be able to do so
shortly?
Postpone the request
Delay the request
Cancel the request
Create a new request - ANSWER -Delay the request [This will
keep the request assigned to them].
Transport & EVS: Configure stages for multi-stage cleans -
ANSWER -Logistics Task Setup.
