CTR 156CT Propane Final Exam || All Answers are Flawless.
If you see an "S" next to the date on a cylinder, that means the cylinder must be requalified
_________ from that date. correct answers 10 years
____________ control the flow of propane through the piping system of a dispenser. correct
answers Valves
At room temperature, propane is in what state? correct answers Gas
Make sure there are no ignition sources within _______ feet of the autogas filling area. correct
answers 25
When filling a cylinder by volume and a white mist begins to escape from the fixed maximum
liquid level gauge, you need to immediately __________. correct answers close the hose end
valve
The permanent marking "4BA240" tells you that the cylinder is made of ___________. correct
answers Alloy steel
A person can be inside a motorhome while the tank is being filled. correct answers False
___________________ is added to propane to increase the likelihood that a leak will be
detected. correct answers Odorant
Propane autogas dispensing systems typically use a ________ to fuel the vehicle. correct answers
gasoline-style, low-emission nozzle
When filling a cylinder by volume, the cylinder will be full when ________. correct answers
white mist begins to escape from the fixed maximum liquid level gauge.
, A customer walks up to your propane filling station to buy Autogas for his vehicle. Can you sell
him a 20lb cylinder to take back to the car to fill it where it ran out of fuel? correct answers No
Only use fire extinguishers to create an escape route — NOT to fight a propane fire. correct
answers True
Cylinders may not be filled if they are past their ___________________ date. correct answers
Re-qualification
All vehicle-mounted ASME tanks are equipped with a(n) ________. (Select all that apply.)
correct answers fixed maximum liquid level gauge
relief valve
ASME data plate
Which valves do you open on the ASME tank during filling? (Select all that apply.) correct
answers Tank filler valve
Fixed maximum liquid level gauge
Leaks, cracks, or bulging are often discovered during a ____________ cylinder inspection.
correct answers pre-fill
The fire extinguisher at the dispenser is used to extinguish propane fires. correct answers False
What are the properties of Propane? (Select all that apply.) correct answers Odorless
Nontoxic
Colorless
Flammable
If you see an "S" next to the date on a cylinder, that means the cylinder must be requalified
_________ from that date. correct answers 10 years
____________ control the flow of propane through the piping system of a dispenser. correct
answers Valves
At room temperature, propane is in what state? correct answers Gas
Make sure there are no ignition sources within _______ feet of the autogas filling area. correct
answers 25
When filling a cylinder by volume and a white mist begins to escape from the fixed maximum
liquid level gauge, you need to immediately __________. correct answers close the hose end
valve
The permanent marking "4BA240" tells you that the cylinder is made of ___________. correct
answers Alloy steel
A person can be inside a motorhome while the tank is being filled. correct answers False
___________________ is added to propane to increase the likelihood that a leak will be
detected. correct answers Odorant
Propane autogas dispensing systems typically use a ________ to fuel the vehicle. correct answers
gasoline-style, low-emission nozzle
When filling a cylinder by volume, the cylinder will be full when ________. correct answers
white mist begins to escape from the fixed maximum liquid level gauge.
, A customer walks up to your propane filling station to buy Autogas for his vehicle. Can you sell
him a 20lb cylinder to take back to the car to fill it where it ran out of fuel? correct answers No
Only use fire extinguishers to create an escape route — NOT to fight a propane fire. correct
answers True
Cylinders may not be filled if they are past their ___________________ date. correct answers
Re-qualification
All vehicle-mounted ASME tanks are equipped with a(n) ________. (Select all that apply.)
correct answers fixed maximum liquid level gauge
relief valve
ASME data plate
Which valves do you open on the ASME tank during filling? (Select all that apply.) correct
answers Tank filler valve
Fixed maximum liquid level gauge
Leaks, cracks, or bulging are often discovered during a ____________ cylinder inspection.
correct answers pre-fill
The fire extinguisher at the dispenser is used to extinguish propane fires. correct answers False
What are the properties of Propane? (Select all that apply.) correct answers Odorless
Nontoxic
Colorless
Flammable
