TECHNICIAN TEST EXAM
QUESTIONS |FREQUENTLY
TESTED QUESTIONS
|RECENTLY TESTING REAL
EXAM QUESTIONS|VERIFIED
SOLUTIONS (100% CORRECT)
Which device do you use to measure voltage? - {✔✔ANSWER✔✔}-Multi
Meter
If you were asked to check out the I/O card on a plc, which card would you look
at? - {✔✔ANSWER✔✔}-Input Card
What does the term current refer to while dealing with electricity? -
{✔✔ANSWER✔✔}-Amps
On a hydraulic pump if you were told the pump is cavitating, what would you
check for? - {✔✔ANSWER✔✔}-Low fluid in the tank
, In a 480 volt three phase system, what would your meter read if you went from
one leg to ground? - {✔✔ANSWER✔✔}-277
WHICH TOOL IS USED WHEN MEASURING SCREW PITCH -
{✔✔ANSWER✔✔}-Thread Gauge
What is a circuit breaker? - {✔✔ANSWER✔✔}-an automatically operated
electrical switch designed to protect an electrical circuit from damage caused by
overload or short circuit.
What does a D.P.S.T. switch refer to? - {✔✔ANSWER✔✔}-double pole
single throw
How many teeth are on a 40B12 sprocket? - {✔✔ANSWER✔✔}-12
The BCD equivalent of 1247 converts to_____. - {✔✔ANSWER✔✔}-0001
0010 0100 0111
What is the binary value of the following terms: Word and Nibble -
{✔✔ANSWER✔✔}-16 digit and 4 digit
What type of programming is used by PLCs. - {✔✔ANSWER✔✔}-ladder
logic
What is the Octal and Hexadecimal= 0-9,A,B,C,D,E,F equivalent for the decimal
numbers 1-15 - {✔✔ANSWER✔✔}-0-7, 10-17, 20... and 0-9,A,B,C,D,E,F