Sub-System
Give this one a try later!
shall be maintained in proper working order, and the Coordinator of Fire
Safety & Alarm Systems in Homeless Shelters is responsible for supervising
the maintenance of the system.
Unnecessary Alarm
Give this one a try later!
, An alarm signal transmitted by a fire alarm system which functioned as
designed, but for which a department response proved unnecessary.
Example: lit cigarette in a non-smoking area,
Lamp Test
Give this one a try later!
This function is used on some FACP's to check the condition of the light
emitting diodes (LEDs) on the FACP.
Fixed-temperature heat detectors
Give this one a try later!
activate the alarm when the detector components
melt at a preset temperature level.
This heat detectors normally require replacement after they have activated
an alarm.
Alarm Silence Switch
Give this one a try later!
is used to silence the building audible and visual devices after evacuation is
complete while the source of the alarm is being investigated.
, Phase I Emergency Elevator Recall (Phase I)
Give this one a try later!
involves using a keyed switch to bring the elevators back to the lobby or
sky lobby. This will cause the elevator car to return non-stop and without
opening the doors to the lobby or sky lobby.
Fire Dampers
Give this one a try later!
close when a rise in temperature occurs and stay shut to stop fire from
passing through a barrier.
Manual Fire Alarm Box
Give this one a try later!
A manually operated device used to initiate an alarm signal.
Sprinkler Water Flow Detector
Give this one a try later!
Give this one a try later!
shall be maintained in proper working order, and the Coordinator of Fire
Safety & Alarm Systems in Homeless Shelters is responsible for supervising
the maintenance of the system.
Unnecessary Alarm
Give this one a try later!
, An alarm signal transmitted by a fire alarm system which functioned as
designed, but for which a department response proved unnecessary.
Example: lit cigarette in a non-smoking area,
Lamp Test
Give this one a try later!
This function is used on some FACP's to check the condition of the light
emitting diodes (LEDs) on the FACP.
Fixed-temperature heat detectors
Give this one a try later!
activate the alarm when the detector components
melt at a preset temperature level.
This heat detectors normally require replacement after they have activated
an alarm.
Alarm Silence Switch
Give this one a try later!
is used to silence the building audible and visual devices after evacuation is
complete while the source of the alarm is being investigated.
, Phase I Emergency Elevator Recall (Phase I)
Give this one a try later!
involves using a keyed switch to bring the elevators back to the lobby or
sky lobby. This will cause the elevator car to return non-stop and without
opening the doors to the lobby or sky lobby.
Fire Dampers
Give this one a try later!
close when a rise in temperature occurs and stay shut to stop fire from
passing through a barrier.
Manual Fire Alarm Box
Give this one a try later!
A manually operated device used to initiate an alarm signal.
Sprinkler Water Flow Detector
Give this one a try later!