1|Page
CQM 3.1 Exam || Most Recent Exam Actual Complete
Real Verified Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ |Guaranteed
Success!! Newest Exam |Verified Exam| –
Construction Quality Management
When are shear plates used? - Answer-Shear plate
connectors are used for wood-to-metal connections.
What are some of the ways a roof can be vented? -
Answer-The best way to vent a roof is with soffit and ridge
vents. Gable end vents can be used; a cupola or metal
roof vents mounted on the roof are also used.
What types of exterior siding are in common use? -
Answer-Solid wood, wood shingles, vinyl, aluminum,
cement board, stucco, synthetic stucco, brick, stone, and
plywood siding panels.
What materials can be used for the finished soffit and
fascia? - Answer-The soffit can be plywood, hardboard,
other approved reconstituted wood panels, vinyl,
aluminum, and gypsum soffit panels.
,2|Page
Why is attic ventilation important? - Answer-Attic
ventilation lowers the temperature of the air, reducing
summer air conditioning costs and removes moisture that
accumulates in the air, causing mold and wetting the
rafters, insulation and ceiling material.
What two atoms form the nucleus for the derivation of the
material plastics? - Answer-Carbon atom and silicon atom.
What is a single molecule called? - Answer-A single
molecule is called a monomer.
What is formed when several monomers link together? -
Answer-Combining monomers forms a polymer.
What are the two major classifications of plastics? -
Answer-the 2 basic ones are thermoplastics and
thermosetting plastics.
Why is it that thermoset plastics cannot be reheated and
reformed into new shapes? - Answer-Thermosetting
plastics are formed by a chemical process and the
molecules cannot slide by each other when heated.
, 3|Page
What is a common way to reduce the cost of plastics? -
Answer-Cost of plastics reduced by adding fillers
What is added to plastic to increase its strength? -
Answer-Stabilizers increase the strength of plastics.
What types of wood products are used to frame heavy
timber buildings? - Answer-Heavy timber framing uses
heavy timbers, dimension lumber, glulams, parallel strand
lumber, laminated veneer lumber and pre-fabricated wood
I-joists.
What is the difference in reaction to fire between timber
structural systems and steel systems? - Answer-Heavy
timber framing chars and absorbs heat during a fire and
retains its strength quite a while. Metal framing loses its
strength rather rapidly when exposed to fire.
What is meant by a hinged arch? - Answer-A hinged arch
has joints that permit some action similar to a hinge but
allow no appreciable separation of adjacent members.
CQM 3.1 Exam || Most Recent Exam Actual Complete
Real Verified Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ |Guaranteed
Success!! Newest Exam |Verified Exam| –
Construction Quality Management
When are shear plates used? - Answer-Shear plate
connectors are used for wood-to-metal connections.
What are some of the ways a roof can be vented? -
Answer-The best way to vent a roof is with soffit and ridge
vents. Gable end vents can be used; a cupola or metal
roof vents mounted on the roof are also used.
What types of exterior siding are in common use? -
Answer-Solid wood, wood shingles, vinyl, aluminum,
cement board, stucco, synthetic stucco, brick, stone, and
plywood siding panels.
What materials can be used for the finished soffit and
fascia? - Answer-The soffit can be plywood, hardboard,
other approved reconstituted wood panels, vinyl,
aluminum, and gypsum soffit panels.
,2|Page
Why is attic ventilation important? - Answer-Attic
ventilation lowers the temperature of the air, reducing
summer air conditioning costs and removes moisture that
accumulates in the air, causing mold and wetting the
rafters, insulation and ceiling material.
What two atoms form the nucleus for the derivation of the
material plastics? - Answer-Carbon atom and silicon atom.
What is a single molecule called? - Answer-A single
molecule is called a monomer.
What is formed when several monomers link together? -
Answer-Combining monomers forms a polymer.
What are the two major classifications of plastics? -
Answer-the 2 basic ones are thermoplastics and
thermosetting plastics.
Why is it that thermoset plastics cannot be reheated and
reformed into new shapes? - Answer-Thermosetting
plastics are formed by a chemical process and the
molecules cannot slide by each other when heated.
, 3|Page
What is a common way to reduce the cost of plastics? -
Answer-Cost of plastics reduced by adding fillers
What is added to plastic to increase its strength? -
Answer-Stabilizers increase the strength of plastics.
What types of wood products are used to frame heavy
timber buildings? - Answer-Heavy timber framing uses
heavy timbers, dimension lumber, glulams, parallel strand
lumber, laminated veneer lumber and pre-fabricated wood
I-joists.
What is the difference in reaction to fire between timber
structural systems and steel systems? - Answer-Heavy
timber framing chars and absorbs heat during a fire and
retains its strength quite a while. Metal framing loses its
strength rather rapidly when exposed to fire.
What is meant by a hinged arch? - Answer-A hinged arch
has joints that permit some action similar to a hinge but
allow no appreciable separation of adjacent members.
