WORKSHOP MANUAL
UTILITY VEHICLE
RTV-X1100C
KiSC issued 10, 2021 A
, TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the RTV-X1100C. It contains 4 parts: "Information", "General", "Mechanism" and
"Servicing".
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870) for the diesel engine that
this workshop manual does not include.
Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
December 2013
© KUBOTA Corporation 2013
KiSC issued 10, 2021 A
,Record of Revisions
For pdf, use search function {Search word} to find all the revised locations.
Last digit
Month of Reference
of the Main Revised Point and Corrective Measures {Search word}
Revision Page
Code No.
1 2014.07 Topic "Brake Pipe" is added. 1-S28,
2-S29
Topic "Adjusting between Front Upper Arm and Stopper" is added. 6-S4
2 2014.09 Add the label because of battery change. I-6
Change lubricants. G-8
3 2015.08 Maintenance interval change. G-17
4 2017.08 Added starter sealant information. 1-S32,
2-S33,
8-S26
5 2019.03 Added Proposition 65 label and revised battery label. I-4,
I-6
Revised callouts (7) and (8) on HST illustration: 2-M2
(7): (HST) changed to (Suction)
(8): (Suction) (Orange Color) changed to (VHT) (Yellow Color)
6 2019.10 Revised callouts (4) and (5) on HST illustration: 2-M2
(4): Forward changed to Dynamic Brake
(5): Dynamic Brake changed to Forward
Added note for bearing installation 2-S48
7 2020.09 Revised electrical circuit for starting system. 8-M3
8 2021.02 Change of tightening torque by changing the material of the hydraulic 1-S9
hose. 1-S28
1-S29
1-S32
2-S5
2-S29
2-S33
6-S3
6-S4
6-S6
6-S7
6-S8
6-S10
6-S11
7-S3
7-S5
7-S8
9 2021.04 Added 200 hrs or 3000 km maintenance item; Suspension arm G-17
bushings G-45
KiSC issued 10, 2021 A
, RTV-X1100C, WSM TO THE READER
Last digit
Month of Reference
of the Main Revised Point and Corrective Measures {Search word}
Revision Page
Code No.
9Y121- 2021.08 The code number of this WSM has been changed from 9Y121-09489 –
26250 to 9Y121-26250.
Added HST return pipe bolt torque to tightening torque table 1-S9
2-S5
Revised linkage, starter and hydraulic pipe 1-S32
2-S33
Added removing muffler 1-S33
1-S33
2-S34
2-S34
1 2021.10 Added the thermistor information of the air conditioner unit. 9-S31
-3
KiSC issued 10, 2021 A
UTILITY VEHICLE
RTV-X1100C
KiSC issued 10, 2021 A
, TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the RTV-X1100C. It contains 4 parts: "Information", "General", "Mechanism" and
"Servicing".
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870) for the diesel engine that
this workshop manual does not include.
Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
December 2013
© KUBOTA Corporation 2013
KiSC issued 10, 2021 A
,Record of Revisions
For pdf, use search function {Search word} to find all the revised locations.
Last digit
Month of Reference
of the Main Revised Point and Corrective Measures {Search word}
Revision Page
Code No.
1 2014.07 Topic "Brake Pipe" is added. 1-S28,
2-S29
Topic "Adjusting between Front Upper Arm and Stopper" is added. 6-S4
2 2014.09 Add the label because of battery change. I-6
Change lubricants. G-8
3 2015.08 Maintenance interval change. G-17
4 2017.08 Added starter sealant information. 1-S32,
2-S33,
8-S26
5 2019.03 Added Proposition 65 label and revised battery label. I-4,
I-6
Revised callouts (7) and (8) on HST illustration: 2-M2
(7): (HST) changed to (Suction)
(8): (Suction) (Orange Color) changed to (VHT) (Yellow Color)
6 2019.10 Revised callouts (4) and (5) on HST illustration: 2-M2
(4): Forward changed to Dynamic Brake
(5): Dynamic Brake changed to Forward
Added note for bearing installation 2-S48
7 2020.09 Revised electrical circuit for starting system. 8-M3
8 2021.02 Change of tightening torque by changing the material of the hydraulic 1-S9
hose. 1-S28
1-S29
1-S32
2-S5
2-S29
2-S33
6-S3
6-S4
6-S6
6-S7
6-S8
6-S10
6-S11
7-S3
7-S5
7-S8
9 2021.04 Added 200 hrs or 3000 km maintenance item; Suspension arm G-17
bushings G-45
KiSC issued 10, 2021 A
, RTV-X1100C, WSM TO THE READER
Last digit
Month of Reference
of the Main Revised Point and Corrective Measures {Search word}
Revision Page
Code No.
9Y121- 2021.08 The code number of this WSM has been changed from 9Y121-09489 –
26250 to 9Y121-26250.
Added HST return pipe bolt torque to tightening torque table 1-S9
2-S5
Revised linkage, starter and hydraulic pipe 1-S32
2-S33
Added removing muffler 1-S33
1-S33
2-S34
2-S34
1 2021.10 Added the thermistor information of the air conditioner unit. 9-S31
-3
KiSC issued 10, 2021 A
