QUESTIONS COMPLETE WITH 100%
VERIFIED ANSWERS
\.BTU - ANSWERS✔-British Thermal Unit is the amount of heat required to raise 1
lb of water 1 degrees F.
\.Ton - ANSWERS✔-amount of heat required to melt a ton of ice (2000 lb) over a
24-hour period.
· 1 ton = 12,000 Btu/hr or 288,000 Btu per 24-hour period
\.Humidity - ANSWERS✔-amount of moisture (water vapor) in the air
· Comfortable relative humidity is about 50%
\.Air Velocity - ANSWERS✔-speed at which air moves from one point to another
· Measured in feet per minute (fpm)
· 40 fpm is ideal
\.Registers - ANSWERS✔-
\.Filtration - ANSWERS✔-process of removing particles and contaminants from air
that circulated through an air distribution system
· Located in air ductwork where air enters the heating and cooling equipment
, \.Ventilation - ANSWERS✔-process that occurs when outdoor air is brought into a
building
\.Exhaust & make up air - ANSWERS✔-Building with exhaust has no recirculation
· Make up air: is air that is used to replace air that is lost to exhaust
\.IAQ (Indoor air quality) - ANSWERS✔-is the quality of the air in the building
space
· CO2 levels: well ventilated - 600 to 1000 AVG. 800
\.ASHRAE (American Society of Heating, Refrigerating, and Air-conditioning
Engineers, Inc.) - ANSWERS✔-· Recommends that ventilation be increased in all
residential, commercial, and industrial buildings
\.Dry bulb temperature - ANSWERS✔-measurement of a sensible heat
\.Latent heat - ANSWERS✔-heat required to change liquid into a gas
\.Relative Humidity - ANSWERS✔-is the amount of moisture in the air compared
to the amount it would hold if the air were saturated
\.Dew point - ANSWERS✔-The temperature below which moisture in the air
begins to condense.