ElevatorFinalExam-Questionswith 100% fg fg fg fg fg
Correct Answers| Verified| Updated fg fg fg fg fg fg
wrench used for rail installation - ✔✔spud wrench
fg fg fg fg fg fg fg
The minimum clearance form the floor to the suspendedceiling is:
fg fg fg fg fg fg fg fg fg fg
a. 80"
b. 96"
c. 7'3"
d. 8'2" - ✔✔a. 80" fg fg fg
whatshould you be aware of when removing a cab for replacement?
fg fg fg fg fg fg fg fg fg fg fg
a. The weight that is to be removed from the ceiling.
fg fg fg fg fg fg fg fg fg
b. The original weight and counterbalancing.
fg fg fg fg
c. How much the cab was out of square.
fg fg fg fg fg fg fg
,d. Cover the panels so they do not get banged up. - ✔✔b. The original weight and
fg fg fg fg fg fg fg fg fg fg fg fg fg fg fg
fg counterbalancing.
When fans are used on modernization jobs for exhausting fumes, what statement is
fg fg fg fg fg fg fg fg fg fg fg fg
fg correct?
a. They're to keep you cool, not for exhausting fumes. fg fg fg fg fg fg fg fg
b. They should direct the fumes into the hoistway.
fg fg fg fg fg fg fg
c. They should direct the fumes into the pit.
fg fg fg fg fg fg fg
d. Theyshould direct the fumes to the outside. - ✔✔d. They should direct the
fg fg fg fg fg fg fg fg fg fg fg fg fg
fg fumes to the outside. fg fg fg
The star symbol is used on the COP for what?
fg fg fg fg fg fg fg fg fg
a. To show where the floor buttons are located.
fg fg fg fg fg fg fg
b. To designate the main floor.
fg fg fg fg
c. To make the door buttons stand out.
fg fg fg fg fg fg
d. To show the alarm bell location. - ✔✔b. To designate the main floor.
fg fg fg fg fg fg fg fg fg fg fg fg
,Using a laminate stop strip against the fence on a table saw:
fg fg fg fg fg fg fg fg fg fg fg
a. Keeps the laminate straight to the blade. fg fg fg fg fg fg
b. Keeps the laminate from lifting off the blade. fg fg fg fg fg fg fg
c. Keeps the laminate from slipping under the fence.
fg fg fg fg fg fg fg
d. Keeps the laminate from going over the fence. - ✔✔c. Keeps the laminate from
fg fg fg fg fg fg fg fg fg fg fg fg fg
fg slipping under the fence. fg fg fg
The contact adhesives must be
fg fg fg fg fg before final bonding: fg fg
a. 85 degreesfg
b. Dry
c. Wet to touch fg fg
d. Cold - ✔✔b. Dry fg fg fg
Whatis the most important piece of equipment you have when using a power saw?
fg fg fg fg fg fg fg fg fg fg fg fg fg fg
, a. Combinationblade fg
b. Safetyglasses fg
c. Wood rule fg
d. Framing square - ✔✔b. safety glasses fg fg fg fg fg
Whenusing a circular saw, which of the following is correct?
fg fg fg fg fg fg fg fg fg fg
a. Never start the cut until the blade is turning full RPM
fg fg fg fg fg fg fg fg fg fg
b. The base is not adjustable for cutting depth
fg fg fg fg fg fg fg
c. Circular saw blades range from 10 to 16 inches fg fg fg fg fg fg fg fg
d. Remove the retractable guard before cutting - ✔✔a. Never start the cut until
fg fg fg fg fg fg fg fg fg fg fg fg
the blade is turning full RPM
fg fg fg fg fg fg
Whatis used to make crosscuts on a table saw?
fg fg fg fg fg fg fg fg fg
a. Push stick fg
b. Rip fence fg
Correct Answers| Verified| Updated fg fg fg fg fg fg
wrench used for rail installation - ✔✔spud wrench
fg fg fg fg fg fg fg
The minimum clearance form the floor to the suspendedceiling is:
fg fg fg fg fg fg fg fg fg fg
a. 80"
b. 96"
c. 7'3"
d. 8'2" - ✔✔a. 80" fg fg fg
whatshould you be aware of when removing a cab for replacement?
fg fg fg fg fg fg fg fg fg fg fg
a. The weight that is to be removed from the ceiling.
fg fg fg fg fg fg fg fg fg
b. The original weight and counterbalancing.
fg fg fg fg
c. How much the cab was out of square.
fg fg fg fg fg fg fg
,d. Cover the panels so they do not get banged up. - ✔✔b. The original weight and
fg fg fg fg fg fg fg fg fg fg fg fg fg fg fg
fg counterbalancing.
When fans are used on modernization jobs for exhausting fumes, what statement is
fg fg fg fg fg fg fg fg fg fg fg fg
fg correct?
a. They're to keep you cool, not for exhausting fumes. fg fg fg fg fg fg fg fg
b. They should direct the fumes into the hoistway.
fg fg fg fg fg fg fg
c. They should direct the fumes into the pit.
fg fg fg fg fg fg fg
d. Theyshould direct the fumes to the outside. - ✔✔d. They should direct the
fg fg fg fg fg fg fg fg fg fg fg fg fg
fg fumes to the outside. fg fg fg
The star symbol is used on the COP for what?
fg fg fg fg fg fg fg fg fg
a. To show where the floor buttons are located.
fg fg fg fg fg fg fg
b. To designate the main floor.
fg fg fg fg
c. To make the door buttons stand out.
fg fg fg fg fg fg
d. To show the alarm bell location. - ✔✔b. To designate the main floor.
fg fg fg fg fg fg fg fg fg fg fg fg
,Using a laminate stop strip against the fence on a table saw:
fg fg fg fg fg fg fg fg fg fg fg
a. Keeps the laminate straight to the blade. fg fg fg fg fg fg
b. Keeps the laminate from lifting off the blade. fg fg fg fg fg fg fg
c. Keeps the laminate from slipping under the fence.
fg fg fg fg fg fg fg
d. Keeps the laminate from going over the fence. - ✔✔c. Keeps the laminate from
fg fg fg fg fg fg fg fg fg fg fg fg fg
fg slipping under the fence. fg fg fg
The contact adhesives must be
fg fg fg fg fg before final bonding: fg fg
a. 85 degreesfg
b. Dry
c. Wet to touch fg fg
d. Cold - ✔✔b. Dry fg fg fg
Whatis the most important piece of equipment you have when using a power saw?
fg fg fg fg fg fg fg fg fg fg fg fg fg fg
, a. Combinationblade fg
b. Safetyglasses fg
c. Wood rule fg
d. Framing square - ✔✔b. safety glasses fg fg fg fg fg
Whenusing a circular saw, which of the following is correct?
fg fg fg fg fg fg fg fg fg fg
a. Never start the cut until the blade is turning full RPM
fg fg fg fg fg fg fg fg fg fg
b. The base is not adjustable for cutting depth
fg fg fg fg fg fg fg
c. Circular saw blades range from 10 to 16 inches fg fg fg fg fg fg fg fg
d. Remove the retractable guard before cutting - ✔✔a. Never start the cut until
fg fg fg fg fg fg fg fg fg fg fg fg
the blade is turning full RPM
fg fg fg fg fg fg
Whatis used to make crosscuts on a table saw?
fg fg fg fg fg fg fg fg fg
a. Push stick fg
b. Rip fence fg
