NS: Conductor training, General knowledge missed questions || All
Answers are Flawless.
you are not allowed to ride a car over _______ feet through a turnout or cross over on the side
next to equipment on an adjacent track
a. 50
b.60
c. 100
d.25 correct answers 60 feet
a train receives a defect message from a detector for a hot wheel. after stopping the train, it is
permissible for the train to perform a roll by inspection?
a. yes
b. no correct answers A. yes
if i have the electronic rule books stored on my personal device,is it permissible to use it to refer
to a rule, timetable, or special instruction while i am on a moving train or engine?
a. no, never
b. yes, following a job safety briefing provided that you are not the engineer or RCO operating
the locomotive, and use of the device will not interfere with any employees performance of
safety related duties
c. No, the train must be stopped before you (excluding passengers) , can use your personal
electronic device for this function. correct answers c. No, the train must be stopped before you
(excluding passengers) , can use your personal electronic device for this function.
How would you visually check to see if the hand brake is applied? (select all that apply)
-you cannot visually check to see if the handbrake is applied
, - the brake shoe is pressed against the wheel
- look at the brake cylinder piston
- the hand brake chain is tight correct answers - the brake shoe is pressed against the wheel
- look at the brake cylinder piston
- the hand brake chain is tight
train or engines must proceed prepared to stop approaching automatic interlockings when
stopped or moving less than _______ MPH after passing the distance signal?
a. 25
b. 15
c. 30
d. 20 correct answers a. 25mph
on your train clearance there is a form Y, designating working limits between MP-1 and MP-5
and in effect at 10:00AM. at 9:30 AM you are approaching MP-1 and there is a conditional stop
sign which is up 30 minutes before it goes into effect. How should you proceed? (select all that
apply)
-stop the train immediately notify the dispatcher
- contact the employee in charge of the limits
- proceed after being notified that the track is clear or the sign is removed by the proper
authority. correct answers -stop the train immediately notify the dispatcher
-proceed after being notified that the track is clear or the sign is removed by the proper authority.
-contact the employee in charge of the limits
how do you know where detectors are located and what type they are?
a. they are indicated in the system timetable
b. they are indicated in the division timetable
c. the only way to know is to work on that territory
Answers are Flawless.
you are not allowed to ride a car over _______ feet through a turnout or cross over on the side
next to equipment on an adjacent track
a. 50
b.60
c. 100
d.25 correct answers 60 feet
a train receives a defect message from a detector for a hot wheel. after stopping the train, it is
permissible for the train to perform a roll by inspection?
a. yes
b. no correct answers A. yes
if i have the electronic rule books stored on my personal device,is it permissible to use it to refer
to a rule, timetable, or special instruction while i am on a moving train or engine?
a. no, never
b. yes, following a job safety briefing provided that you are not the engineer or RCO operating
the locomotive, and use of the device will not interfere with any employees performance of
safety related duties
c. No, the train must be stopped before you (excluding passengers) , can use your personal
electronic device for this function. correct answers c. No, the train must be stopped before you
(excluding passengers) , can use your personal electronic device for this function.
How would you visually check to see if the hand brake is applied? (select all that apply)
-you cannot visually check to see if the handbrake is applied
, - the brake shoe is pressed against the wheel
- look at the brake cylinder piston
- the hand brake chain is tight correct answers - the brake shoe is pressed against the wheel
- look at the brake cylinder piston
- the hand brake chain is tight
train or engines must proceed prepared to stop approaching automatic interlockings when
stopped or moving less than _______ MPH after passing the distance signal?
a. 25
b. 15
c. 30
d. 20 correct answers a. 25mph
on your train clearance there is a form Y, designating working limits between MP-1 and MP-5
and in effect at 10:00AM. at 9:30 AM you are approaching MP-1 and there is a conditional stop
sign which is up 30 minutes before it goes into effect. How should you proceed? (select all that
apply)
-stop the train immediately notify the dispatcher
- contact the employee in charge of the limits
- proceed after being notified that the track is clear or the sign is removed by the proper
authority. correct answers -stop the train immediately notify the dispatcher
-proceed after being notified that the track is clear or the sign is removed by the proper authority.
-contact the employee in charge of the limits
how do you know where detectors are located and what type they are?
a. they are indicated in the system timetable
b. they are indicated in the division timetable
c. the only way to know is to work on that territory
