1|Page
A.3 TestOut Ethical Hacker Pro Certification Practice
Exam 2026/2027 Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers)
Already Graded A+|| Newest Exam!!!
Complete this lab as follows:
Right-click Start and select Windows PowerShell (Admin).
Maximize the window for easier viewing.
At the prompt, type Get-Eventlog -logname * and press
Enter.In the Entries column, notice the number of entries
for the logs.
Type Clear-Eventlog -logname Application and press
Enter.
Type Clear-Eventlog -logname System and press Enter.
Type Get-Eventlog -logname * and press Enter.The log
entries for Application is zero. The log entries for System is
one because another event occurred between the times
you cleared the log and viewed the entry list. - Answer-
8.4.5 You are a cybersecurity consultant and have been
asked to work with the ACME, Inc. company to ensure that
their network is protected from hackers. As part of the
tests, you need to clear a few log files.
In this lab, your task is to use Windows PowerShell (as
Admin) to clear the following event logs:
,2|Page
Use get-eventlog to view the available event logs.
Use clear-eventlog to clear the Application and System
logs.
Complete this lab as follows:
Right-click Start and select Windows PowerShell (Admin).
Maximize the window for easier viewing.
At the command prompt, type auditpol /get /category:* and
press Enter to view the current audit policies.Notice the
different settings used for each system.
Type auditpol /clear /y and press Enter to disable all audit
policies.
Type auditpol /get /category:* and press Enter to confirm
that the audits were disabled.Notice that all of the polices
are now set to No Auditing. - Answer-8.4.6 You are a
cybersecurity consultant and have been asked to work
with the ACME, Inc. company to ensure their network is
protected from hackers. As part of the tests, you need to
disable logging on a Windows system.
In this lab, your task is to use Windows PowerShell (as
Admin) to:
View the current audit policies on the system.
Disable all audit policies.
,3|Page
Confirm that all the audits were disabled.
Complete this lab as follows:
Encrypt the user data into the file to be shared as follows:
In the search field on the taskbar, type OpenStego. Under
Best match, select OpenStego. In the Message File field,
select the ellipses at the end of the field. Select John.txt.
Select Open. In the Cover File field, select the ellipses at
the end of the field. Select gear.png file. Select Open. In
the Output Stego File field, select the ellipses at the end of
the field. In the File name field, enter send.png. Select
Open.
Password protect the file as follows: In the Password field,
enter NoMor3L3@ks! In the Confirm Password field, enter
NoMor3L3@ks! Select Hide Data. Select OK.
Extract the data and open the file as follows: Under Data
Hiding, select Extract Data. In the Input Stego File field,
select the ellipses. Select send.png file with the
encryption. Select Open. In the Output Folder for Message
File field, select the ellip - Answer-8.4.11 You are the IT
security administrator for a small corporate network.
Recently, some of your firm's proprietary data leaked
online. You have been asked to use steganography to
encrypt data into a file that will be shared with a business
, 4|Page
partner. The data will allow you to track the source if the
information is leaked again.
In this lab, your task is to use OpenStego to hide data
inside a picture file as follows:
Encrypt the user data found in John.txt into gear.png.
Save the output file into the Documents folder as
send.png.
Password protect the file with NoMor3L3@ks! as the
password.
Confirm the functionality of the steganography by
extracting the data from send.png into the Exports folder
and opening the file to view the hidden user data.
Complete this lab as follows:
From the Favorites bar, open Terminal.
At the prompt, type nmap -p- 198.28.1.0/24 and press
Enter to scan for open ports on all servers located on this
network.
Type nmap -p- 192.168.0.0/24 and press Enter to scan for
open ports on all the servers located on this network.
In the top right, select Answer Questions.
Answer the questions.
A.3 TestOut Ethical Hacker Pro Certification Practice
Exam 2026/2027 Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers)
Already Graded A+|| Newest Exam!!!
Complete this lab as follows:
Right-click Start and select Windows PowerShell (Admin).
Maximize the window for easier viewing.
At the prompt, type Get-Eventlog -logname * and press
Enter.In the Entries column, notice the number of entries
for the logs.
Type Clear-Eventlog -logname Application and press
Enter.
Type Clear-Eventlog -logname System and press Enter.
Type Get-Eventlog -logname * and press Enter.The log
entries for Application is zero. The log entries for System is
one because another event occurred between the times
you cleared the log and viewed the entry list. - Answer-
8.4.5 You are a cybersecurity consultant and have been
asked to work with the ACME, Inc. company to ensure that
their network is protected from hackers. As part of the
tests, you need to clear a few log files.
In this lab, your task is to use Windows PowerShell (as
Admin) to clear the following event logs:
,2|Page
Use get-eventlog to view the available event logs.
Use clear-eventlog to clear the Application and System
logs.
Complete this lab as follows:
Right-click Start and select Windows PowerShell (Admin).
Maximize the window for easier viewing.
At the command prompt, type auditpol /get /category:* and
press Enter to view the current audit policies.Notice the
different settings used for each system.
Type auditpol /clear /y and press Enter to disable all audit
policies.
Type auditpol /get /category:* and press Enter to confirm
that the audits were disabled.Notice that all of the polices
are now set to No Auditing. - Answer-8.4.6 You are a
cybersecurity consultant and have been asked to work
with the ACME, Inc. company to ensure their network is
protected from hackers. As part of the tests, you need to
disable logging on a Windows system.
In this lab, your task is to use Windows PowerShell (as
Admin) to:
View the current audit policies on the system.
Disable all audit policies.
,3|Page
Confirm that all the audits were disabled.
Complete this lab as follows:
Encrypt the user data into the file to be shared as follows:
In the search field on the taskbar, type OpenStego. Under
Best match, select OpenStego. In the Message File field,
select the ellipses at the end of the field. Select John.txt.
Select Open. In the Cover File field, select the ellipses at
the end of the field. Select gear.png file. Select Open. In
the Output Stego File field, select the ellipses at the end of
the field. In the File name field, enter send.png. Select
Open.
Password protect the file as follows: In the Password field,
enter NoMor3L3@ks! In the Confirm Password field, enter
NoMor3L3@ks! Select Hide Data. Select OK.
Extract the data and open the file as follows: Under Data
Hiding, select Extract Data. In the Input Stego File field,
select the ellipses. Select send.png file with the
encryption. Select Open. In the Output Folder for Message
File field, select the ellip - Answer-8.4.11 You are the IT
security administrator for a small corporate network.
Recently, some of your firm's proprietary data leaked
online. You have been asked to use steganography to
encrypt data into a file that will be shared with a business
, 4|Page
partner. The data will allow you to track the source if the
information is leaked again.
In this lab, your task is to use OpenStego to hide data
inside a picture file as follows:
Encrypt the user data found in John.txt into gear.png.
Save the output file into the Documents folder as
send.png.
Password protect the file with NoMor3L3@ks! as the
password.
Confirm the functionality of the steganography by
extracting the data from send.png into the Exports folder
and opening the file to view the hidden user data.
Complete this lab as follows:
From the Favorites bar, open Terminal.
At the prompt, type nmap -p- 198.28.1.0/24 and press
Enter to scan for open ports on all servers located on this
network.
Type nmap -p- 192.168.0.0/24 and press Enter to scan for
open ports on all the servers located on this network.
In the top right, select Answer Questions.
Answer the questions.
