NRPP RADON MEASUREMENTS EXAM
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+
According to EPA protocols, what is the minimum distance a
radon measurement device should be below the ceiling of
the room in which it is placed? - ANSWERS-At least 12
inches
According to EPA protocols, what is the minimum distance a
radon measurement device should be placed from an
exterior opening such as a door or window? - ANSWERS-At
least 36 inches
According to EPA protocols, what is the minimum distance a
radon measurement device should be placed from an
exterior wall? - ANSWERS-At least 12 inches
When conducting a short-term radon measurement,
openings to the outside should be closed, including
,combustion air and bathroom exhaust fans. - ANSWERS-
False
When conducting a short-term radon measurement,
evaporative coolers(swamp coolers) may be operated for
cooling. - ANSWERS-False
When conducting a short-term radon measurement, air-
conditioning systems that only recirculate interior air may
be operated. - ANSWERS-True
When conducting a short-term radon measurement, whole
house fans may be operated provided exterior doors and
windows are closed. - ANSWERS-False
Following an initial short-term test with results above 4
pCi/L, a long-term test is requested by the client. Under
what conditions should the long-term test be conducted? -
ANSWERS-The test should be conducted in the same
location as the initial test, and under normal lived-in
conditions.
, What is the minimum time a radon mitigation system
should operate before post-mitigation testing is started? -
ANSWERS-24 hours
Prior to initiating a short-term test lasting for 2 to 3 days,
one should instruct the occupant to: - ANSWERS-Close all
exterior doors and windows for 12 hours prior to initiating
the test.
What would be the best advice for a client planning to
renovate a home? - ANSWERS-Perform a short-term test
both prior to and after renovation.
When conducting a post-mitigation radon test ,where
should ?you place the radon measurement device -
ANSWERS-Place the device in the same location as the pre-
mitigation test.
If an initial short-term measurement in a house had a result
of 11 pCi/L, what would be the minimum duration of a
follow-up measurement? - ANSWERS-48 hours
The averaged result of side-by-side tests for a real estate
transaction was 3.2 pCi/L. At the same time the buyers
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+
According to EPA protocols, what is the minimum distance a
radon measurement device should be below the ceiling of
the room in which it is placed? - ANSWERS-At least 12
inches
According to EPA protocols, what is the minimum distance a
radon measurement device should be placed from an
exterior opening such as a door or window? - ANSWERS-At
least 36 inches
According to EPA protocols, what is the minimum distance a
radon measurement device should be placed from an
exterior wall? - ANSWERS-At least 12 inches
When conducting a short-term radon measurement,
openings to the outside should be closed, including
,combustion air and bathroom exhaust fans. - ANSWERS-
False
When conducting a short-term radon measurement,
evaporative coolers(swamp coolers) may be operated for
cooling. - ANSWERS-False
When conducting a short-term radon measurement, air-
conditioning systems that only recirculate interior air may
be operated. - ANSWERS-True
When conducting a short-term radon measurement, whole
house fans may be operated provided exterior doors and
windows are closed. - ANSWERS-False
Following an initial short-term test with results above 4
pCi/L, a long-term test is requested by the client. Under
what conditions should the long-term test be conducted? -
ANSWERS-The test should be conducted in the same
location as the initial test, and under normal lived-in
conditions.
, What is the minimum time a radon mitigation system
should operate before post-mitigation testing is started? -
ANSWERS-24 hours
Prior to initiating a short-term test lasting for 2 to 3 days,
one should instruct the occupant to: - ANSWERS-Close all
exterior doors and windows for 12 hours prior to initiating
the test.
What would be the best advice for a client planning to
renovate a home? - ANSWERS-Perform a short-term test
both prior to and after renovation.
When conducting a post-mitigation radon test ,where
should ?you place the radon measurement device -
ANSWERS-Place the device in the same location as the pre-
mitigation test.
If an initial short-term measurement in a house had a result
of 11 pCi/L, what would be the minimum duration of a
follow-up measurement? - ANSWERS-48 hours
The averaged result of side-by-side tests for a real estate
transaction was 3.2 pCi/L. At the same time the buyers
