AHR-110 Exam 3 Study Guide | QUESTIONS AND
ANSWERS | LATEST UPDATE
Save
Practice questions for this set
Learn 1/7 Study using Learn
Vibration-Dependent
Choose an answer
The most common type of system A deep vacuum can most accurately
1 2
leaks are __________ leaks. be measured in
The mechanical strain of motion, Sludge and other solids can be
3 rotation, and refrigerant flow are all 4 removed from a system by using
associated with _________ leaks. __________.
Don't know?
Terms in this set (102)
, The most common type of system Standing
leaks are __________ leaks.
A(n) ____________ leak detector requires a Ultraviolet
lubricant-specific dye be injected
into a charged system to find the
leak.
Removing air and/or other Degassing
noncondensable gases from a
system using a vacuum pump is
called ___________.
The process of removing both Evacuation
noncondensable gases and water
vapor is called ________.
Sludge and other solids can be liquid- and suction-line filter/driers
removed from a system by using
__________.
Atmospheric pressure, 0 psig, is the 760,000
equivalent of about __________ microns.
(T/F): The process of a solid changing False
to a vapor without passing through
the liquid state is called dehydration.
(T/F): A system with Schrader valve True
gauge ports will take longer to
evacuate than a system with service
valves.
ANSWERS | LATEST UPDATE
Save
Practice questions for this set
Learn 1/7 Study using Learn
Vibration-Dependent
Choose an answer
The most common type of system A deep vacuum can most accurately
1 2
leaks are __________ leaks. be measured in
The mechanical strain of motion, Sludge and other solids can be
3 rotation, and refrigerant flow are all 4 removed from a system by using
associated with _________ leaks. __________.
Don't know?
Terms in this set (102)
, The most common type of system Standing
leaks are __________ leaks.
A(n) ____________ leak detector requires a Ultraviolet
lubricant-specific dye be injected
into a charged system to find the
leak.
Removing air and/or other Degassing
noncondensable gases from a
system using a vacuum pump is
called ___________.
The process of removing both Evacuation
noncondensable gases and water
vapor is called ________.
Sludge and other solids can be liquid- and suction-line filter/driers
removed from a system by using
__________.
Atmospheric pressure, 0 psig, is the 760,000
equivalent of about __________ microns.
(T/F): The process of a solid changing False
to a vapor without passing through
the liquid state is called dehydration.
(T/F): A system with Schrader valve True
gauge ports will take longer to
evacuate than a system with service
valves.
