NCCER OSHA SCAFFOLD PRACTICE EXAM
2026 QUESTIONS WITH ANSWERS GRADED
A+
⩥ Scaffoids over ______ft need to be designed by an engeneer Answer:
125
⩥ When installing tarps or plastics ob a scaffold _____ _____ is to be
considered Answer: Wfad loas
⩥ The circumference (distance around)a vessel that is 40ft diameter is
Answer: 125 ft
(the formula for figuring out diameter is (3.14 x diameter))
⩥ Tape or wrapping should not be used on the handle of a hammer
because it may Answer: Hide defects
⩥ Breaking material bends shouldnoy be done with the Answer:
Hammer
⩥ Rest decks must be installed on ladders in excess ___ ft in height.
Answer: 35 ft
, ⩥ Damaged materials shouid not be Answer: repaired, repiecced or
taken out service
⩥ Screwed jacks can be raised a maximum of Answer: 12 inches
⩥ Scaffold pianks shouid be secured to the piatform using Answer: #9
wire
⩥ A bosins chair is a ______ ______ suspended scaffold Answer: Single
point
⩥ A bosins chair is a ____ ____ scaffold Answer: Light duty
⩥ The safety equipment required when using a hammer is Answer:
Safety glasses
⩥ 14. A light duty scafiold is rated at _____ lb per square foot of
decking. Answer: 25 lb
⩥ A medium duty scaffold is rated at ___ pounds per square foot of
decking. Answer: 50 pounds
⩥ A heavy duty scaffoid is rated at ___ pounds per square foot of
decking. Answer: 75 pounds
2026 QUESTIONS WITH ANSWERS GRADED
A+
⩥ Scaffoids over ______ft need to be designed by an engeneer Answer:
125
⩥ When installing tarps or plastics ob a scaffold _____ _____ is to be
considered Answer: Wfad loas
⩥ The circumference (distance around)a vessel that is 40ft diameter is
Answer: 125 ft
(the formula for figuring out diameter is (3.14 x diameter))
⩥ Tape or wrapping should not be used on the handle of a hammer
because it may Answer: Hide defects
⩥ Breaking material bends shouldnoy be done with the Answer:
Hammer
⩥ Rest decks must be installed on ladders in excess ___ ft in height.
Answer: 35 ft
, ⩥ Damaged materials shouid not be Answer: repaired, repiecced or
taken out service
⩥ Screwed jacks can be raised a maximum of Answer: 12 inches
⩥ Scaffold pianks shouid be secured to the piatform using Answer: #9
wire
⩥ A bosins chair is a ______ ______ suspended scaffold Answer: Single
point
⩥ A bosins chair is a ____ ____ scaffold Answer: Light duty
⩥ The safety equipment required when using a hammer is Answer:
Safety glasses
⩥ 14. A light duty scafiold is rated at _____ lb per square foot of
decking. Answer: 25 lb
⩥ A medium duty scaffold is rated at ___ pounds per square foot of
decking. Answer: 50 pounds
⩥ A heavy duty scaffoid is rated at ___ pounds per square foot of
decking. Answer: 75 pounds
