SWPPP Walmart - Stormwater Exam 2026/2027 Actual
Complete Real Verified Exam Questions & Correct
Well Elaborated Answers |100% Verified solutions |
Already Verified Test ||Newest Exam!!
Which of the following is not a silt fence related
deficiency?
A. Tears or holes in the fabric
B. Excessive sediment accumulation
C. Track out
D. Undercutting - Answer-C. Trackout
Requirements for managing stormwater activity on a
construction site are outlined in the following regulation: -
Answer-NPDES
True or False: Subcontractors do not need a GC badge
during the first week of construction as this is the slowest
time of the project. - Answer-False
Runoff Controls include all but which of the following:
A. Rolled erosion control products
,2|Page
B. Diversions
C. Check dams
D. Slope drains - Answer-A. Rolled erosion control
products
To reduce the possibility of undercutting in channels, you
should: - Answer-Install filter fabric under rock and similar
materials placed within the stormwater conveyance
In addition to Worker Verification and badging, what other
incidents and/or regulatory contacts may happen? -
Answer-Immigration, E-Verify, wages, harassment,
discrimination and joint employment.
If a worker is removed during an audit, are they allowed
back on site? - Answer-Yes, if the auditor clears them.
When inspecting inlet protection look for all but one of the
following:
A. Structural damage including torn fabric and broken
supports
B. Restricted flow and bypass
, 3|Page
C. Appropriate vegetative stabilization
D. Accumulated sediment and debris - Answer-C.
Appropriate vegetative stabilization D
If you believe stormwater BMP modifications are
necessary, you must: - Answer-Seek written approval from
the project SWPP designer and, if required, the project
Owner.
Which of the following is NOT a beneficial use of water?
A. Swimming
B. Drinking
C. Flushing a spill down a storm drain
D. Industrial and agricultural water supply - Answer-C.
Flushing a spill down a storm drain D
While inspecting filed BMPs, the SWPP inspector should
perform all of the following except:
A. Note BMPs in need of repair or maintenance
B. Verify BMPs are installed per plans and specs.
C. Assume BMPs are in good condition from a distance.