NYC Electrician Exam Questions and
Correct Answers| Updated
The value of current, time, or both at which an adjustable circuit breaker is set
to trip is known as?
A) Inverse time
B) Ampacity
C) Automatic
D) Setting
D) Setting.
Art. 100 Definitions
The cross-sectional area of three or more THW conductors in a conduit must not
exceed what percent of the cross-sectional area of the conduit?
A) 30%
B) 40%
C) 50%
D) 60%
B) 40 %
Chapter 9 Table 1
,EMT must be supported within what distance from an outlet box, junction box,
device box, cabinet, conduit body or other terminations?
A) 3 feet
B) 4 feet
C) 5 feet
D) 6 feet
A) 3 feet
Article 358.30 (A)
When a branch circuit feeds both noncontinuous and continuous loads, the circuit
must be sized to accommodate 100% of the noncontinuous load plus what
percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125%
D) 125%
Article. 210.20 (A)
What is the allowable Ampacity of a 600 MCM copper conductor type TW?
A) 300 Amps
,B) 350 Amps
C) 355 Amps
D) 400 Amps
B) 350 Amps
Table- 310.16
The name given to a system or circuit conductor that is intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor
D) Grounded or Neutral Conductor
Article 100 Definitions
The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material
A) Moisture-resistant, noncombustible material
, Article 408.50
A metal pole supporting a light fixture shall have an accessible handhole not less
than ________ inches?
A) 2 X 6 inches
B) 3 X 4 inches
C) 2 X 4 inches
D) 4 X 8 inches
C) 2 X 4 inches
Article 410.30 (B) (1)
The largest standard rating for fuses and inverse time circuit breakers is?
A) 1000 amps
B) 1600 amps
C) 1200 amps
D) 6000 amps
D) 6000 amps
Article 240.6
A feeder tap less than 25 feet long does not require overcurrent protection at the
tap if the Ampacity of the tap conductor is at least?
Correct Answers| Updated
The value of current, time, or both at which an adjustable circuit breaker is set
to trip is known as?
A) Inverse time
B) Ampacity
C) Automatic
D) Setting
D) Setting.
Art. 100 Definitions
The cross-sectional area of three or more THW conductors in a conduit must not
exceed what percent of the cross-sectional area of the conduit?
A) 30%
B) 40%
C) 50%
D) 60%
B) 40 %
Chapter 9 Table 1
,EMT must be supported within what distance from an outlet box, junction box,
device box, cabinet, conduit body or other terminations?
A) 3 feet
B) 4 feet
C) 5 feet
D) 6 feet
A) 3 feet
Article 358.30 (A)
When a branch circuit feeds both noncontinuous and continuous loads, the circuit
must be sized to accommodate 100% of the noncontinuous load plus what
percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125%
D) 125%
Article. 210.20 (A)
What is the allowable Ampacity of a 600 MCM copper conductor type TW?
A) 300 Amps
,B) 350 Amps
C) 355 Amps
D) 400 Amps
B) 350 Amps
Table- 310.16
The name given to a system or circuit conductor that is intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor
D) Grounded or Neutral Conductor
Article 100 Definitions
The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material
A) Moisture-resistant, noncombustible material
, Article 408.50
A metal pole supporting a light fixture shall have an accessible handhole not less
than ________ inches?
A) 2 X 6 inches
B) 3 X 4 inches
C) 2 X 4 inches
D) 4 X 8 inches
C) 2 X 4 inches
Article 410.30 (B) (1)
The largest standard rating for fuses and inverse time circuit breakers is?
A) 1000 amps
B) 1600 amps
C) 1200 amps
D) 6000 amps
D) 6000 amps
Article 240.6
A feeder tap less than 25 feet long does not require overcurrent protection at the
tap if the Ampacity of the tap conductor is at least?
