CSX Conductor test 2 2025 Question and answers already
passed
1. 5203.1
1) Where the train is originally assembled.
When must Class I
2) When the train has been ott of air more than 24 hours
brake test be
performed on the 3) When adding or removing more than one solid block of
cars
entire train
2. 5208.1
1) All brakes release.
When performing a
brake 2) Both sides of the car are examined during the inspection
process
test, you must be sure that: to observe the
functioning of all moving parts of the brake system.
3. 5208.1 BONUS When air brakes need to be
Air brake cylinder retested you must:
piston travel is correct
when de- termined to
be:
4. 5203.3
Before being added
to a through train at
an inter- mediate
location, a solid
block of cars
must:
5. 5203.2
A Class I brake test is
not required on the
entire train:
6. 5212.1
,1) 6-9 inches on body mounted brakes.
2) A maximum of 6 inches on truck-
mounted brakes.
1) Receive a Class I brake test.
2) Not be ott air for more than 24 hours.
1) When removing a single car or one
solid block of cars.
2) When adding a previously
tested car or one previously tested
solid block of cars.
3) Removing defective cars regardless
of the number or location of defective
cars.
4) Change in locomotive consist or EOT.
1) Charge the brake pipe pressure
at the rear car to within 15 PSI of the
regulating
valve setting (75)
2) Be sure air brakes remain applied
for 3 minutes.
, CSX Conductor test 2 2025
Study online at https://quizlet.com/_h6zupe
7. 5212.1 1) At the trains originating location, set the car out.
When the air brake 2) At an intermediate location, once tagged and brakes
fails the retest:
have been cut-out,
may be moved to the next point where it can be repaired.
8. 5213 DEFINITION
Whenever a Class I or Class IA brake test is performed on the
entire
Brake Test Certificate (BTC) train, the locomotive
operator must be notified and a brake test certificate
completed.
Notification may be
made verbally. If notified verbally, the locomotive operator
must complete the brake test
certificate with the information provided. The certificate must
be kept on the controlling
locomotive until the train reaches its final destination.
9. 5213 BTC 1) Air brake test was satisfactorily performed
Brake Test Certificate must 2) Date and time the brake test was performed
include the following infor- 3) Number of cars inspected.
mation: 4) Name or ID number of the qualified person who
performed the test.
5) Location where the test was performed.
10. 206.4 1) Enter the ID code of the EOT into the head-of-train device.
Perform the 2) Press the TEST button on the EOT.
following steps to
arm two-way
telemetry:
A device used for cutting in and cutting out the control
11. 5003.2 DEFINITION
valve on a locomotive or car.
Branch Pipe Cut-Out
Cock
, 12. 1) Close the cut-out cock in the brake pipe branch pipe by
placing the handle in line
passed
1. 5203.1
1) Where the train is originally assembled.
When must Class I
2) When the train has been ott of air more than 24 hours
brake test be
performed on the 3) When adding or removing more than one solid block of
cars
entire train
2. 5208.1
1) All brakes release.
When performing a
brake 2) Both sides of the car are examined during the inspection
process
test, you must be sure that: to observe the
functioning of all moving parts of the brake system.
3. 5208.1 BONUS When air brakes need to be
Air brake cylinder retested you must:
piston travel is correct
when de- termined to
be:
4. 5203.3
Before being added
to a through train at
an inter- mediate
location, a solid
block of cars
must:
5. 5203.2
A Class I brake test is
not required on the
entire train:
6. 5212.1
,1) 6-9 inches on body mounted brakes.
2) A maximum of 6 inches on truck-
mounted brakes.
1) Receive a Class I brake test.
2) Not be ott air for more than 24 hours.
1) When removing a single car or one
solid block of cars.
2) When adding a previously
tested car or one previously tested
solid block of cars.
3) Removing defective cars regardless
of the number or location of defective
cars.
4) Change in locomotive consist or EOT.
1) Charge the brake pipe pressure
at the rear car to within 15 PSI of the
regulating
valve setting (75)
2) Be sure air brakes remain applied
for 3 minutes.
, CSX Conductor test 2 2025
Study online at https://quizlet.com/_h6zupe
7. 5212.1 1) At the trains originating location, set the car out.
When the air brake 2) At an intermediate location, once tagged and brakes
fails the retest:
have been cut-out,
may be moved to the next point where it can be repaired.
8. 5213 DEFINITION
Whenever a Class I or Class IA brake test is performed on the
entire
Brake Test Certificate (BTC) train, the locomotive
operator must be notified and a brake test certificate
completed.
Notification may be
made verbally. If notified verbally, the locomotive operator
must complete the brake test
certificate with the information provided. The certificate must
be kept on the controlling
locomotive until the train reaches its final destination.
9. 5213 BTC 1) Air brake test was satisfactorily performed
Brake Test Certificate must 2) Date and time the brake test was performed
include the following infor- 3) Number of cars inspected.
mation: 4) Name or ID number of the qualified person who
performed the test.
5) Location where the test was performed.
10. 206.4 1) Enter the ID code of the EOT into the head-of-train device.
Perform the 2) Press the TEST button on the EOT.
following steps to
arm two-way
telemetry:
A device used for cutting in and cutting out the control
11. 5003.2 DEFINITION
valve on a locomotive or car.
Branch Pipe Cut-Out
Cock
, 12. 1) Close the cut-out cock in the brake pipe branch pipe by
placing the handle in line
