and answers verified to pass
2025/2026
1) Upon stopping
1. how often must you announce by radio
2) Every 15 minuets
that your train is stopped on a
controlled track?
2. After an airbrake test but before proceeding That Air pressure has restored
to the rear
what must you make sure of the brake pipethe train.
pressure?
3. Which of the following is not Rear to Front communication is not a fail- ure
considered a failure of two way
telemetry?
4. What speed must not be exceeded when op- Half the range of vision not
more then 20
erating in YL-S territory approaching a sig- derail that requires
nal? one and it is
defective what
5. General signal rules are in effect for actions should be
YL-S track? taken?
6. You clear the block of a hand 9. What must you do if
operated switch in TC territory, after you determine a
the train is clear of the track and the switch is defective?
switch has been re- stored, who can
clear up to the dispatcher?
7. If the train dispatcher stops the train
when moving through a controlled
point, what must the train have
before proceeding in either
direction?
8. If you encounter a lock on a switch or
1/
24
,H
1) The conductor
2) The engineer
1) Authority from the dispatcher
2) Proper signal
ct the proper authority and be gov- erned by their instructions
2/
24
, CSX Conductor Test 2
Study online at https://quizlet.com/_g158ma
1) Do not operate
2) Tag is as defective
3) Contact the dispatcher
10. You have doubled your train and Get permission from the dispatcher
received instructions from the
yardmaster to leave the yard through
the high switch that leads out to
controlled track, what must you do
before operating this switch?
Each crewmember must confirm the po-
11. You are working at a location that
requires
you to operate main track switches in TWC-D sition of switches and that
they have
territory what is required before leaving? 15. You are in TWC-D
territory you have
operat- ed hand
operated switches
12. When must permission from the what form must you
dispatcher be received before record these
operating an electrically locked movements on?
switch or derail?
13. You are operating the Q1227 and
the next location is an electrically
locked switch and you are told to
clear up, what must you de before
reporting clear?
14. Unless other arrangements are
made the same employee who places a
dule controlled switch into hand must
restore it back to what position?
3/
24