FAE (Fire Apparatus Engineer) Illinois EXAM (2025/2026)
Updated: EXAM QUESTIONS WITH ACCURATE ANSWERS |
GET IT RIGHT!!
Leave the first rating
Save
Students also studied
FAE (Fire Apparatus Engineer) Illinoi... FAE Questions (ILLINOIS) FSVO State Test FA
73 terms 80 terms 102 terms 163
potrawskij Preview flytrap_1987 Preview John_Carpinelli4 Preview
Practice questions for this set
Learn 1 /7 Study with Learn
What are all the steps in a Service Test?
Choose an answer
1. 20 minutes: 100% @ 150 psi
2. 10 minutes: 70 % @ 200 psi
1 3. 10 minutes: 50% @ 250 psi 2 62.5 lbs
Optional: 100% @ 165 psi (overload or spurt
test)
100% @ 165 psi (done in certification test for
3 4 231 cubic inches
10 minutes)
Don't know?
Terms in this set (73)
62.5 lbs What does one cubic foot of water weigh?
1.728 cubic inches What does One cubic foot of water contain in inches?
7.5 gallons What does One cubic foot of water contain in gallons?
, 8.35 lbs What does One gallon of water weigh?
231 cubic inches What does One gallon of water contain in inches?
2.304 feet How high will One psi elevate water?
14.7 psi What is atmospheric pressure at sea level?
34 feet What is the maximum lift for drafting? (Theoretically)
1.13 feet of lift How high does One inch (1") mercury (inches in vacuum) lift?
10 psi What is the recommended minimum psi that should be maintained on the
compound gauge when taking water from a hydrant?
Stored or potential energy that is available to force What is Static pressure?
water through pipes and fittings, fire hose, and
adapters.
1. 2 Hour: 100% @ 150 psi What are all the steps in Certification Test (pre-service tests)?
2. 1/2 hour: 70% @ 200 psi
3. 1/2 hour: 50% @ 250 psi
4. 10 minutes: 100% @ 165 psi (overload or spurt test)
100% @ 165 psi (done in certification test for 10 minutes) What is a Spurt or Overload test?
1. 20 minutes: 100% @ 150 psi What are all the steps in a Service Test?
2. 10 minutes: 70 % @ 200 psi
3. 10 minutes: 50% @ 250 psi
Optional: 100% @ 165 psi (overload or spurt test)
100% capacity @ 150 psi net pump pressure What are Pump Tests?
70% capacity @ 200 psi net pump pressure
50% capacity @ 250 psi net pump pressure
Net Pump Pressure (NEP) is the measurement of the What is Net Engine/Pump Pressure (NEP)?
total work performed by the pump:
a. To lift water into the pump (drafting)
b. To discharge water from the pump
NEP= Suction Side Work(drafting) + Discharge Side
Work
Suction Side Work(psi)= Lift (ft)+Intake Hose FL(Friction How do you figure out Suction Side Work ?
Loss) (psi) Divided by 2.3
100 psi What is Fog nozzle pressure for Hand held nozzle and Master Stream?
Hand Held : 50 psi What is Smooth Bore nozzle pressures for Hand held nozzle and Master
Master Stream: 80 psi Stream?
"For every action there is an equal and opposite What is Newton's Third Law of motion pertaining to Nozzle Reaction?
reaction"
Updated: EXAM QUESTIONS WITH ACCURATE ANSWERS |
GET IT RIGHT!!
Leave the first rating
Save
Students also studied
FAE (Fire Apparatus Engineer) Illinoi... FAE Questions (ILLINOIS) FSVO State Test FA
73 terms 80 terms 102 terms 163
potrawskij Preview flytrap_1987 Preview John_Carpinelli4 Preview
Practice questions for this set
Learn 1 /7 Study with Learn
What are all the steps in a Service Test?
Choose an answer
1. 20 minutes: 100% @ 150 psi
2. 10 minutes: 70 % @ 200 psi
1 3. 10 minutes: 50% @ 250 psi 2 62.5 lbs
Optional: 100% @ 165 psi (overload or spurt
test)
100% @ 165 psi (done in certification test for
3 4 231 cubic inches
10 minutes)
Don't know?
Terms in this set (73)
62.5 lbs What does one cubic foot of water weigh?
1.728 cubic inches What does One cubic foot of water contain in inches?
7.5 gallons What does One cubic foot of water contain in gallons?
, 8.35 lbs What does One gallon of water weigh?
231 cubic inches What does One gallon of water contain in inches?
2.304 feet How high will One psi elevate water?
14.7 psi What is atmospheric pressure at sea level?
34 feet What is the maximum lift for drafting? (Theoretically)
1.13 feet of lift How high does One inch (1") mercury (inches in vacuum) lift?
10 psi What is the recommended minimum psi that should be maintained on the
compound gauge when taking water from a hydrant?
Stored or potential energy that is available to force What is Static pressure?
water through pipes and fittings, fire hose, and
adapters.
1. 2 Hour: 100% @ 150 psi What are all the steps in Certification Test (pre-service tests)?
2. 1/2 hour: 70% @ 200 psi
3. 1/2 hour: 50% @ 250 psi
4. 10 minutes: 100% @ 165 psi (overload or spurt test)
100% @ 165 psi (done in certification test for 10 minutes) What is a Spurt or Overload test?
1. 20 minutes: 100% @ 150 psi What are all the steps in a Service Test?
2. 10 minutes: 70 % @ 200 psi
3. 10 minutes: 50% @ 250 psi
Optional: 100% @ 165 psi (overload or spurt test)
100% capacity @ 150 psi net pump pressure What are Pump Tests?
70% capacity @ 200 psi net pump pressure
50% capacity @ 250 psi net pump pressure
Net Pump Pressure (NEP) is the measurement of the What is Net Engine/Pump Pressure (NEP)?
total work performed by the pump:
a. To lift water into the pump (drafting)
b. To discharge water from the pump
NEP= Suction Side Work(drafting) + Discharge Side
Work
Suction Side Work(psi)= Lift (ft)+Intake Hose FL(Friction How do you figure out Suction Side Work ?
Loss) (psi) Divided by 2.3
100 psi What is Fog nozzle pressure for Hand held nozzle and Master Stream?
Hand Held : 50 psi What is Smooth Bore nozzle pressures for Hand held nozzle and Master
Master Stream: 80 psi Stream?
"For every action there is an equal and opposite What is Newton's Third Law of motion pertaining to Nozzle Reaction?
reaction"
