LADWP Construction Manual Quiz | QUESTIONS
AND ANSWERS | LATEST UPDATE
Save
Practice questions for this set
Learn 1/7 Study using Learn
Backfilling
Choose an answer
What is the minimum fill requirement
_______________ should take place as soon
1 on pipes smaller than 12" in diameter? 2
as the shoring is removed. CM 204-2
CM 110-6
What personal protective equipment Where must hydrant flanges be set in
3 is required when setting up traffic 4 relation to finish grade in sidewalks or
control? CM 201-1 parkways? CM 110-14
Don't know?
, Terms in this set (79)
What is the minimum fill requirement 30"
on pipes smaller than 12" in diameter?
CM 110-6
What is the minimum fill requirement 36"
on pipes 12" in diameter and larger?
CM 110-6
What is the minimum pipe separation 1"
required on pipes connected by
mechanical couplings? CM 110-11
What must be done to mechanical Restraining
couplings within 60" of fittings
subjected to unbalanced hydrostatic
forces? CM 110-11
Where must hydrant flanges be set in Flush with finish grade
relation to finish grade in sidewalks or
parkways? CM 110-14
What is the clearance requirement 12"
between the back face of a curb and
a meter box on services up to 2"? CM
110-15
What is the cover requirement on 24"
services 2" and smaller? CM 110-15
AND ANSWERS | LATEST UPDATE
Save
Practice questions for this set
Learn 1/7 Study using Learn
Backfilling
Choose an answer
What is the minimum fill requirement
_______________ should take place as soon
1 on pipes smaller than 12" in diameter? 2
as the shoring is removed. CM 204-2
CM 110-6
What personal protective equipment Where must hydrant flanges be set in
3 is required when setting up traffic 4 relation to finish grade in sidewalks or
control? CM 201-1 parkways? CM 110-14
Don't know?
, Terms in this set (79)
What is the minimum fill requirement 30"
on pipes smaller than 12" in diameter?
CM 110-6
What is the minimum fill requirement 36"
on pipes 12" in diameter and larger?
CM 110-6
What is the minimum pipe separation 1"
required on pipes connected by
mechanical couplings? CM 110-11
What must be done to mechanical Restraining
couplings within 60" of fittings
subjected to unbalanced hydrostatic
forces? CM 110-11
Where must hydrant flanges be set in Flush with finish grade
relation to finish grade in sidewalks or
parkways? CM 110-14
What is the clearance requirement 12"
between the back face of a curb and
a meter box on services up to 2"? CM
110-15
What is the cover requirement on 24"
services 2" and smaller? CM 110-15
