COSC 464 OSHA EXAM REVIEW | QUESTIONS AND ANSWERS | RATED 100% CORRECT.

COSC 464 OSHA EXAM REVIEW | QUESTIONS AND ANSWERS | RATED 100% CORRECT.

Question 1
Which organization is recognized as the first safety organization in the United States?
A) OSHA
B) NIOSH
C) MSHA
D) ANSI
E) NFPA
Correct Answer: C) MSHA
Rationale: The Mine Safety and Health Administration (MSHA) predates OSHA and was
the first organization dedicated to establishing safety standards for workers, specifically in
the mining industry.

Question 2
Which fire extinguisher is silver in color and specifically designed for use on grease fires?
A) Type A
B) Type B
C) Type ABC
D) Type K
E) Type D
Correct Answer: D) Type K
Rationale: Type K fire extinguishers are typically silver and contain wet chemical agents
specifically formulated to extinguish high-temperature cooking grease and oil fires
commonly found in commercial kitchens.

Question 3
Which type of fire extinguisher is the most commonly used across various industries due to its
versatility?
A) Type K
B) Type D
C) Type ABC
D) Type BC
E) Type Water-only
Correct Answer: C) Type ABC
Rationale: The ABC fire extinguisher is known as "multipurpose" because it is effective on
Class A (combustibles), Class B (flammable liquids), and Class C (electrical) fires.

Question 4
In which document must all workplace incidents and injuries be officially recorded for OSHA
compliance?
A) The JSA Sheet
B) The SDS Folder
C) The OSHA 300 Log

, Page 2

D) The Daily Progress Report
E) The Insurance Claim Form
Correct Answer: C) The OSHA 300 Log
Rationale: The OSHA 300 Log is a mandatory record used by employers to track and
classify work-related injuries and illnesses throughout the year.

Question 5
What classification of injury must be provided to a company's insurance provider?
A) Minor scratches
B) Near misses
C) Recordable injuries
D) First-aid only cases
E) Verbal complaints
Correct Answer: C) Recordable injuries
Rationale: While all accidents should be reported internally, "Recordable" injuries—those
requiring medical treatment beyond first aid—must be provided to insurance and
documented on official logs.
Question 6
Regarding workplace injuries, which of the following statements is true?
A) Only fatalities must be reported to the supervisor.
B) All injuries must be reported, but not all have to be recorded on the OSHA 300 log.
C) If an injury is not recorded, it does not need to be reported.
D) Reporting and recording are the same process.
E) Only injuries involving heavy machinery are reported.
Correct Answer: B) All injuries must be reported, but not all have to be recorded on the
OSHA 300 log.
Rationale: Safety protocols require workers to report every incident to ensure proper care
and investigation, but OSHA only requires certain types of medical treatment to be
officially "recorded."

Question 7
Under the Code of Federal Regulations (CFR), which number designates the standards for
"General Industry"?
A) 1926
B) 1910
C) 1904
D) 1915
E) 1970
Correct Answer: B) 1910
Rationale: 29 CFR 1910 contains the safety and health standards that apply to most general
industry workplaces, distinct from construction or maritime standards.

, Page 3

Question 8
Which CFR number designates the OSHA standards specifically for the "Construction" industry?
A) 1910
B) 1904
C) 1926
D) 1911
E) 1800
Correct Answer: C) 1926
Rationale: 29 CFR 1926 is the specific set of federal regulations governing safety
requirements for all construction-related activities.

Question 9
In OSHA regulations, what is the primary focus of "Subpart C"?
A) Fire Protection
B) Electrical Standards
C) The General Duty Clause
D) Ladder Safety
E) Steel Erection
Correct Answer: C) The General Duty Clause
Rationale: Subpart C (General Safety and Health Provisions) includes the General Duty
Clause, which requires employers to provide a workplace free from recognized hazards
that could cause death or serious harm.
Question 10
Which OSHA Subpart specifically addresses "Fire Protection" in the workplace?
A) Subpart G
B) Subpart L
C) Subpart F
D) Subpart X
E) Subpart P
Correct Answer: C) Subpart F
Rationale: Subpart F provides the requirements for fire suppression equipment, fire
brigades, and emergency exit procedures to protect workers from fire-related hazards.

Question 11
Subpart G of the OSHA standards covers which group of safety items?
A) Heavy Equipment and Cranes
B) Scaffolds and Walkways
C) Signs, Signals, and Barricades
D) Personal Protective Equipment
E) Toxic Substances
Correct Answer: C) Signs, Signals, and Barricades

, Page 4

Rationale: Subpart G regulates the use of visual cues, traffic control, and physical barriers
used to warn and protect employees from hazards on a jobsite.

Question 12
If a safety officer is looking for regulations regarding "Ladders," which Subpart should they
consult?
A) Subpart L
B) Subpart P
C) Subpart X
D) Subpart K
E) Subpart R
Correct Answer: C) Subpart X
Rationale: Subpart X (Stairways and Ladders) details the construction, use, and
maintenance requirements for all types of ladders and stair systems.

Question 13
Regulations for "Scaffolds" are found under which OSHA Subpart?
A) Subpart X
B) Subpart G
C) Subpart L
D) Subpart R
E) Subpart M
Correct Answer: C) Subpart L
Rationale: Subpart L establishes the safety requirements for the design, assembly, and use
of various scaffolding systems.

Question 14
Which Subpart is dedicated to "Excavation" and trenching safety?
A) Subpart K
B) Subpart N
C) Subpart P
D) Subpart R
E) Subpart F
Correct Answer: C) Subpart P
Rationale: Subpart P contains the specific rules for soil classification, sloping, benching, and
shoring required to prevent trench cave-ins.

Question 15
Subpart K of the OSHA standards provides the regulations for:
A) Heavy Machinery
B) Steel Erection
C) Electrical Safety