The three types of human error are
Omission, commission, and extraneous
Which doubler(s) require heat treatment before installation?
-101
-102
Both
What is absolute humidity?
The actual amount of the water vapor in a mixture of air and water.
If both the volume and the absolute temperature of a confined gas are doubled,
the pressure will
not change
In order to reconstruct lost or destroyed aircraft maintenance records, what is it
necessary to establish?
Total time-in-service of the airframe
Weathervaning tendency is greatest when taxiing
a tailwheel-type airplane in a direct crosswind
What metal has special short-time heat properties and is used in the construction
of aircraft firewalls?
, Titanium alloy
What bolthead identifies an AN corrosion resistant steel bolt?
a single dash on the head of the bolt
In performing a dye penetrant inspection, the developer
acts as a blotter to produce a visible indication
An aircraft had an empty weight of 2,886 pounds with a moment of 101,673.78
before several alterations were made, the alterations included:
1. Removing 2 passenger seats (15 pounds each) at +71;
2. Installing a cabinet (97 pounds) at +71;
3. Installing a seat and safety belt (20 pounds) at +71;
4. Installing radio equipment (30 pounds) at +94
The alterations caused the new empty weight CG to move...
1.62 inches aft of the original empty weight CG
When computing weight and balance, an airplane is considered to be in balance
when
the average moment arm of the loaded airplane falls within its CG range
A simple way to find the center of a circle on a sketch or drawing, or a circular
piece of material is to
draw two non-parallel chord lines across the circle and then a corresponding
perpendicular bisector lines across each chord line
What is the dimension of the chamfer?
0.0635 X 45
Which statement regarding the hydrometer reading of a lead-acid storage battery
electrolyte is true?
The hydrometer reading does not require a temperature correction if the electrolyte
temperature is 80 Fahrenheit