CSSO Study Guide Exam with Verified
Detailed Answers
Companies with strong safety cultures usually have lower? -
correct answer ✅Turnover
Which of these is a true statement regarding safety? -
correct answer ✅Safety is a learned behavior and attitude.
Poor lighting, excessive noise, and inadequate guards for moving
parts are examples of? -
correct answer ✅Unsafe conditions
The activity that consists of breaking a job into its component tasks
and then analyzing each step forpotential hazards is called a? -
correct answer ✅Job safety analysis
A measure of the probability, consequences, and exposure related
to an event is referred to as? -
correct answer ✅Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to? -
correct answer ✅Cover the opening and label the cover
, CSSO Study Guide Exam with Verified
Detailed Answers
The D-ring or support point on a safety harness should be placed? -
correct answer ✅Between the shoulder blades
A personal fall arrest system should be inspected monthly by a? -
correct answer ✅Competent person
Lanyards that have no shock-absorbing features are used for? -
correct answer ✅Positioning
When placing a ladder against a platform or roof, the top of the
ladder should extend above the point where the ladder touches the
platform or roof by at least? -
correct answer ✅3 feet (91 cm)
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects from falling and striking
a person below? -
correct answer ✅Toeboards, debris nets, or canopies must be
applied.
Detailed Answers
Companies with strong safety cultures usually have lower? -
correct answer ✅Turnover
Which of these is a true statement regarding safety? -
correct answer ✅Safety is a learned behavior and attitude.
Poor lighting, excessive noise, and inadequate guards for moving
parts are examples of? -
correct answer ✅Unsafe conditions
The activity that consists of breaking a job into its component tasks
and then analyzing each step forpotential hazards is called a? -
correct answer ✅Job safety analysis
A measure of the probability, consequences, and exposure related
to an event is referred to as? -
correct answer ✅Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to? -
correct answer ✅Cover the opening and label the cover
, CSSO Study Guide Exam with Verified
Detailed Answers
The D-ring or support point on a safety harness should be placed? -
correct answer ✅Between the shoulder blades
A personal fall arrest system should be inspected monthly by a? -
correct answer ✅Competent person
Lanyards that have no shock-absorbing features are used for? -
correct answer ✅Positioning
When placing a ladder against a platform or roof, the top of the
ladder should extend above the point where the ladder touches the
platform or roof by at least? -
correct answer ✅3 feet (91 cm)
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects from falling and striking
a person below? -
correct answer ✅Toeboards, debris nets, or canopies must be
applied.
