Asphalt Pavement Exam
Questions and Answers
100% Verified Graded A+
1. A composite material that is prepared in a hot-mix plant and used for con-
struction of highway, parking lot, or airfield pavements capable of supporting
high traffic volumes and axle loads.
Answer: Asphaltic concrete
2. A system that overrides the self-leveling action of the asphalt paver screed
and enables paving to a predetermined grade and slope, using either a rigid
or a mobile type reference.
Answer: Automatic screed controls
3. Filter system at an asphalt plant to capture fine dust particles.
Answer: Baghouse
4. The asphalt cement material in a paving mix used to bind the aggregate par-
ticles together, to prevent the entrance of moisture, and to act as a cushioning
agent.
, Answer: Binder
5. A layer of asphalt mix placed between the base and the surface courses in the
pavement structure.
Answer: Binder course
6. The initial compaction of the asphalt mix that takes place directly behind
the paver and is intended to achieve maximum density in the shortest time
frame.
Answer: Breakdown
7. The transverse inclination of a road way or other surface.
Answer: Cross-slope
8. The top surface layer of an asphalt pavement, usually less than 1 in. thick, to
improve skid resistance and smoothness.
Answer: Friction course
9. A wire or string erected at a specified grade and alignment that is used as a
reference for an automatic control system on a paver, a milling machine, or a fine-
grade machine (trimmer).
Answer: Grade or string line
10. Two long arms extending forward from each side of the asphalt paver screed
and attached to tow points on the tractor. This mechanical connection enables
Questions and Answers
100% Verified Graded A+
1. A composite material that is prepared in a hot-mix plant and used for con-
struction of highway, parking lot, or airfield pavements capable of supporting
high traffic volumes and axle loads.
Answer: Asphaltic concrete
2. A system that overrides the self-leveling action of the asphalt paver screed
and enables paving to a predetermined grade and slope, using either a rigid
or a mobile type reference.
Answer: Automatic screed controls
3. Filter system at an asphalt plant to capture fine dust particles.
Answer: Baghouse
4. The asphalt cement material in a paving mix used to bind the aggregate par-
ticles together, to prevent the entrance of moisture, and to act as a cushioning
agent.
, Answer: Binder
5. A layer of asphalt mix placed between the base and the surface courses in the
pavement structure.
Answer: Binder course
6. The initial compaction of the asphalt mix that takes place directly behind
the paver and is intended to achieve maximum density in the shortest time
frame.
Answer: Breakdown
7. The transverse inclination of a road way or other surface.
Answer: Cross-slope
8. The top surface layer of an asphalt pavement, usually less than 1 in. thick, to
improve skid resistance and smoothness.
Answer: Friction course
9. A wire or string erected at a specified grade and alignment that is used as a
reference for an automatic control system on a paver, a milling machine, or a fine-
grade machine (trimmer).
Answer: Grade or string line
10. Two long arms extending forward from each side of the asphalt paver screed
and attached to tow points on the tractor. This mechanical connection enables
