Save
H
o
m
e
In
s
p
e
ct
o
r
Fl
o
ri
d
a
T
e
st
P
r
a
ct
ic
e
Q
u
e
st
io
n
s
Students
also
studied
, Practice questions for this set
Learn 1/7 Study with Learn
ensures that two fuses or circuit breakers are disconnected at the same time
Choose an answer
Air-admittance valves are __________ to Standpipes for clothes washers should
1 vent fixtures installed at island structures in 2 extend at least ____ inches and no more
kitchens. than ____ inches above the trap weir.
Notches in solid lumber joists, rafters and
3 Linking _________________. 4 beams should not be longer than
____________ the depth of the member.
Terms in this set (137)
Don't know?
Air-admittance valves are __________ to vent fixtures Permitted
installed at island structures in kitchens.
The door between an attached garage and a dwelling unit 1 3/8
should be of solid wood not less than ________ inches
thick.
If particleboard panels used as wall sheathing are applied do not meet
in a horizontal pattern across the wall, the end joints
should be offset so that four panel corners ________.
The size of a P-trap drainpipe should be at least _______ 1.5
inches.
Notches in solid lumber joists, rafters and beams should 1/3
not be longer than ____________ the depth of the
member.
A minimum service of _____ amps is required for a single 100
residential dwelling unit.
If the service or feeder rating in amps is 200, then the 4/0
aluminum AWG size should be _______.
T/F: In homes located in areas having a history of ice True
forming along the eaves, an ice barrier consisting of at
least three layers of underlayment cemented together is
required.
There should be at least ____-inch gypsum board applied 1/2
on the garage side to separate the garage from the
residence and its attic space.
A window well should have a horizontal area of at least 9 and 36
____ square feet, with a minimum horizontal projection
and width of _____ inches.
The opening to an attic space that has any mechanical 30 and 20
equipment located in it should be a minimum of ______
inches by ______ inches.
H
o
m
e
In
s
p
e
ct
o
r
Fl
o
ri
d
a
T
e
st
P
r
a
ct
ic
e
Q
u
e
st
io
n
s
Students
also
studied
, Practice questions for this set
Learn 1/7 Study with Learn
ensures that two fuses or circuit breakers are disconnected at the same time
Choose an answer
Air-admittance valves are __________ to Standpipes for clothes washers should
1 vent fixtures installed at island structures in 2 extend at least ____ inches and no more
kitchens. than ____ inches above the trap weir.
Notches in solid lumber joists, rafters and
3 Linking _________________. 4 beams should not be longer than
____________ the depth of the member.
Terms in this set (137)
Don't know?
Air-admittance valves are __________ to vent fixtures Permitted
installed at island structures in kitchens.
The door between an attached garage and a dwelling unit 1 3/8
should be of solid wood not less than ________ inches
thick.
If particleboard panels used as wall sheathing are applied do not meet
in a horizontal pattern across the wall, the end joints
should be offset so that four panel corners ________.
The size of a P-trap drainpipe should be at least _______ 1.5
inches.
Notches in solid lumber joists, rafters and beams should 1/3
not be longer than ____________ the depth of the
member.
A minimum service of _____ amps is required for a single 100
residential dwelling unit.
If the service or feeder rating in amps is 200, then the 4/0
aluminum AWG size should be _______.
T/F: In homes located in areas having a history of ice True
forming along the eaves, an ice barrier consisting of at
least three layers of underlayment cemented together is
required.
There should be at least ____-inch gypsum board applied 1/2
on the garage side to separate the garage from the
residence and its attic space.
A window well should have a horizontal area of at least 9 and 36
____ square feet, with a minimum horizontal projection
and width of _____ inches.
The opening to an attic space that has any mechanical 30 and 20
equipment located in it should be a minimum of ______
inches by ______ inches.
