OSHA 510 PRACTICE EXAM QUESTIONS
WITH CORRECT ANSWERS (ALREADY
PASSED)
Who has the authority to stop crane operations? - Answer- Whenever there is a concern
as to safety, the (operator) must have the authority to stop and refuse to handle loads
until a qualified person has determined that safety has been assured.
IAW 1926.1419, during operations when is the operator required to safely stop
operations? - Answer- 1926.1419(f)
During operations requiring signals, the ability to transmit signals between the operator
and signal person must be maintained. If that ability is interrupted at any time, the
operator must safely stop operations requiring signals until it is reestablished and a
proper signal is given and understood.
Who is responsible for training crane signal personnel? - Answer- 1926.1430(b)
(The employer) must train each employee who will be assigned to work as a signal
persons.
True or False: Rollover Protection materials must perform at 10 degrees Fahrenheit? -
Answer- False - 1926.1001(f)(2)(iv)
Material used in the ROPS must have the capability of performing at (zero degrees
Fahrenheit).
What regulation cover training for powered industrial trucks? - Answer- 1910.178
IAW Subpart A, which organization and regulation (incorporated by reference) covers
eye and face protection? - Answer- ANSI Z87.1
What is the hierarchical control method employers use to protect employees? - Answer-
Engineering Controls
Administrative Controls
PPE
True or False: Workplace injuries and Illnesses can lower morale and increased cost to
train replacement workers - Answer- (True) -
Workplace Injuries and Illnesses
, According to "The Act, What is the mission of OSHA? - Answer- (Protect American
Workers) -
To assure safe and healthful working conditions for working men and women by setting
and enforcing standards and by providing training, outreach, education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are free from
recognized hazards? - Answer- False - Employees are protected from retaliation for
raising workplace health and safety concerns and for reporting work-related injuries and
illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard? - Answer- Meaning "general" or across the board
True or False: OSHA directives including Enforcement and Compliance directives
ensures consistent enforcement of OSHA regulations - Answer- (True) - OSHA
directives including (Enforcement and Compliance Directives)
True or False: If not corrected and documented at time of inspection, the employers
must certify that abatement is completed for each cited violation? - Answer- (True) -
1903.19(c)(3)
The employer's certification that abatement is complete must include, for each cited
violation, in addition to the information required by paragraph (h) of this section, the date
and method of abatement and a statement that affected employees and their
representatives have been informed of the abatement.
Define Creating Employer - Answer- The employer that caused a hazardous condition
that violates an OSHA standard.
What is the process CSHO use when conducting and inspection? - Answer- 1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
True or False: Days the employee was only able to work a partial work shift is classified
as restricted work activity? - Answer- True - 1904.7(b)(4)(i)(A)
You keep the employee from performing one or more of the routine functions of his or
her job, or from working the full workday that he or she would otherwise have been
scheduled to work
When calculating incident rate, what does the 200,000 figure in the formula represent? -
Answer- The 200,000 figure in the formula represents
the number of hours (100 employees working
40 hours per week, 50 weeks) per year would
work, and provides the standard base for
WITH CORRECT ANSWERS (ALREADY
PASSED)
Who has the authority to stop crane operations? - Answer- Whenever there is a concern
as to safety, the (operator) must have the authority to stop and refuse to handle loads
until a qualified person has determined that safety has been assured.
IAW 1926.1419, during operations when is the operator required to safely stop
operations? - Answer- 1926.1419(f)
During operations requiring signals, the ability to transmit signals between the operator
and signal person must be maintained. If that ability is interrupted at any time, the
operator must safely stop operations requiring signals until it is reestablished and a
proper signal is given and understood.
Who is responsible for training crane signal personnel? - Answer- 1926.1430(b)
(The employer) must train each employee who will be assigned to work as a signal
persons.
True or False: Rollover Protection materials must perform at 10 degrees Fahrenheit? -
Answer- False - 1926.1001(f)(2)(iv)
Material used in the ROPS must have the capability of performing at (zero degrees
Fahrenheit).
What regulation cover training for powered industrial trucks? - Answer- 1910.178
IAW Subpart A, which organization and regulation (incorporated by reference) covers
eye and face protection? - Answer- ANSI Z87.1
What is the hierarchical control method employers use to protect employees? - Answer-
Engineering Controls
Administrative Controls
PPE
True or False: Workplace injuries and Illnesses can lower morale and increased cost to
train replacement workers - Answer- (True) -
Workplace Injuries and Illnesses
, According to "The Act, What is the mission of OSHA? - Answer- (Protect American
Workers) -
To assure safe and healthful working conditions for working men and women by setting
and enforcing standards and by providing training, outreach, education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are free from
recognized hazards? - Answer- False - Employees are protected from retaliation for
raising workplace health and safety concerns and for reporting work-related injuries and
illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard? - Answer- Meaning "general" or across the board
True or False: OSHA directives including Enforcement and Compliance directives
ensures consistent enforcement of OSHA regulations - Answer- (True) - OSHA
directives including (Enforcement and Compliance Directives)
True or False: If not corrected and documented at time of inspection, the employers
must certify that abatement is completed for each cited violation? - Answer- (True) -
1903.19(c)(3)
The employer's certification that abatement is complete must include, for each cited
violation, in addition to the information required by paragraph (h) of this section, the date
and method of abatement and a statement that affected employees and their
representatives have been informed of the abatement.
Define Creating Employer - Answer- The employer that caused a hazardous condition
that violates an OSHA standard.
What is the process CSHO use when conducting and inspection? - Answer- 1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
True or False: Days the employee was only able to work a partial work shift is classified
as restricted work activity? - Answer- True - 1904.7(b)(4)(i)(A)
You keep the employee from performing one or more of the routine functions of his or
her job, or from working the full workday that he or she would otherwise have been
scheduled to work
When calculating incident rate, what does the 200,000 figure in the formula represent? -
Answer- The 200,000 figure in the formula represents
the number of hours (100 employees working
40 hours per week, 50 weeks) per year would
work, and provides the standard base for
