Advance Rigger Test |2026
Update Actual Exam|Complete
Frequently Tested Questions
And Verified Answers With
Rationales|100% Accurate
Answers | Already Graded A+
What is meant by the term "two blocking"?
a. Placing blocks under the outrigger beams.
b. The load block contacts the boom point sheaves.
,c. Stacking loads on top of one another.
d. The load strikes the boom while swinging. - 🧠 ANSWER ✔✔b. The load
block contacts the boom point sheaves.
Lifting 20,000 lbs with a 2-leg bridle sling at a 30° horizontal sling angle,
what is the force applied to each leg?
a. 10,000 pounds
b. 20,000 pounds
c. 30,000 pounds
d. 40,000 pounds - 🧠 ANSWER ✔✔b. 20,000 pounds
In multiple crane lifts using an equalizer beam, the weight of the beam
should be considered:
a. Part of the crane boom
b. Part of the load weight
c. Part of the crane weight
d. A non-factor - 🧠 ANSWER ✔✔b. Part of the load weight
What is required if there is a deviation from the lift plan?
, a. The supervisor's permission
b. The rigger's permission
c. A new lift plan
d. Mark ups on the existing lift plan - 🧠 ANSWER ✔✔c. A new lift plan
On level ground using skids and rollers, what percent of the weight of the
load should yield the required line pull as a general rule of thumb?
a. 2%
b. 5%
c. 10%
d. 20% - 🧠 ANSWER ✔✔b. 5%
All of the following are results of unbalanced reeving of the hook block
EXCEPT:
a. Wear on the sheaves
b. Torque on the boom
c. Wear on the hook
d. Wear on the wire rope - 🧠 ANSWER ✔✔c. Wear on the hook
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
Update Actual Exam|Complete
Frequently Tested Questions
And Verified Answers With
Rationales|100% Accurate
Answers | Already Graded A+
What is meant by the term "two blocking"?
a. Placing blocks under the outrigger beams.
b. The load block contacts the boom point sheaves.
,c. Stacking loads on top of one another.
d. The load strikes the boom while swinging. - 🧠 ANSWER ✔✔b. The load
block contacts the boom point sheaves.
Lifting 20,000 lbs with a 2-leg bridle sling at a 30° horizontal sling angle,
what is the force applied to each leg?
a. 10,000 pounds
b. 20,000 pounds
c. 30,000 pounds
d. 40,000 pounds - 🧠 ANSWER ✔✔b. 20,000 pounds
In multiple crane lifts using an equalizer beam, the weight of the beam
should be considered:
a. Part of the crane boom
b. Part of the load weight
c. Part of the crane weight
d. A non-factor - 🧠 ANSWER ✔✔b. Part of the load weight
What is required if there is a deviation from the lift plan?
, a. The supervisor's permission
b. The rigger's permission
c. A new lift plan
d. Mark ups on the existing lift plan - 🧠 ANSWER ✔✔c. A new lift plan
On level ground using skids and rollers, what percent of the weight of the
load should yield the required line pull as a general rule of thumb?
a. 2%
b. 5%
c. 10%
d. 20% - 🧠 ANSWER ✔✔b. 5%
All of the following are results of unbalanced reeving of the hook block
EXCEPT:
a. Wear on the sheaves
b. Torque on the boom
c. Wear on the hook
d. Wear on the wire rope - 🧠 ANSWER ✔✔c. Wear on the hook
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
