CSX Conductor Quiz 3 Exam Questions &
Answers | 100% Verified solutions |Questions
with Correct Answers 2026 latest update!!
Save
Terms in this set (48)
How many hours is a Class 1 brake 24 Hours
test considered "good" after your
train is off air?
T/F When performing a Class 1 True
brake test you must check that the
brakes apply and release on each
car
If you retest a cars air brakes after a 3 minutes
failed air test, how long must the
brake remain applied?
Which of the following are true Both sides of a car must be examined at some
about a Class 1 Air Brake Test? time in the inspection process to observe the
functioning of all moving parts of the brake
system
To what device do you arm the EOT HTD - Head of Train device
to?
What is the purpose of a Branch To cut the brake control valve into or out of
Pipe Cock? service
, What is the term used to describe Off Air
when the air brake system on a car
or cut of cars is not being supplied
with air pressurized to 60 psi or
more?
T/F Before performing a roll-by True
inspection to verify air brakes
release during a Class 1 brake test,
do both sides have to be
inspected?
What speed is not to be exceeded 10 mph
during a roll-by inspection?
S/A Telemetry can be used to 1) The controlling locomotive has and operative
perform an air brake test and meet HTD 2)rear car is equipped with an operative EOT
2 way equipped requirement when capable of 2 way communication
the following conditions are met
How many working air brakes must Each car must apply and release
you have before performing a Class
1 brake test?
What brake test is required after Class 3
recoupling at a crossing where no
changes to the consist were made?
T/F When notified by the True
Mechanical Department that
emergency capability of telemetry
has passed the bench test, no
further action is required.
Answers | 100% Verified solutions |Questions
with Correct Answers 2026 latest update!!
Save
Terms in this set (48)
How many hours is a Class 1 brake 24 Hours
test considered "good" after your
train is off air?
T/F When performing a Class 1 True
brake test you must check that the
brakes apply and release on each
car
If you retest a cars air brakes after a 3 minutes
failed air test, how long must the
brake remain applied?
Which of the following are true Both sides of a car must be examined at some
about a Class 1 Air Brake Test? time in the inspection process to observe the
functioning of all moving parts of the brake
system
To what device do you arm the EOT HTD - Head of Train device
to?
What is the purpose of a Branch To cut the brake control valve into or out of
Pipe Cock? service
, What is the term used to describe Off Air
when the air brake system on a car
or cut of cars is not being supplied
with air pressurized to 60 psi or
more?
T/F Before performing a roll-by True
inspection to verify air brakes
release during a Class 1 brake test,
do both sides have to be
inspected?
What speed is not to be exceeded 10 mph
during a roll-by inspection?
S/A Telemetry can be used to 1) The controlling locomotive has and operative
perform an air brake test and meet HTD 2)rear car is equipped with an operative EOT
2 way equipped requirement when capable of 2 way communication
the following conditions are met
How many working air brakes must Each car must apply and release
you have before performing a Class
1 brake test?
What brake test is required after Class 3
recoupling at a crossing where no
changes to the consist were made?
T/F When notified by the True
Mechanical Department that
emergency capability of telemetry
has passed the bench test, no
further action is required.
