BECC Test 1 Comprehensive Resource To Help You
Ace 2026-2027 Includes Frequently Tested Questions
With ELABORATED 100% Correct COMPLETE
SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Who is responsible for designating the QAO? - Correct Answer: CO
2. Who is responsible for reviewing and approving FWP and CWP? - Correct Answer:
DH
3. Who ensures that Test, Measuring, and Diagnostic Equipment (TMDE) has current
calibration stickers? - Correct Answer: Craftsman
4. Who verifies that work has been completed by entering their initial or signature on all
applicable QA forms, tags, and CWB? - Correct Answer: QAI
5. Who verifies that completed test results for controlled work fully satisfy test
requirements and initiates corrective action if they do not? - Correct Answer: QAI
6. Who coordinates and administers the QA program within their respective work center? -
Correct Answer: QAI
7. Level I materials must be closely tracked and controlled by whom? - Correct Answer:
Controlled material petty officer (CMPO)
,8. What must be used to identify and trace controlled materials? - Correct Answer: QA
tags
9. Which form is used to authorize the start of work on all ship systems and equipment by
activities other than the ship force? - Correct Answer: Work authorization form
(WAF)
10. Which QA document is used to record and authorize deviations from technical
documents? - Correct Answer: Departure from specifications (DFS)
11. What is used to indicate a step in a work procedure that MUST be performed correctly
the first time and requires close supervision? - Correct Answer: Critical quality
control points (Q-Points)
12. What are non-crew members that perform maintenance on the ship called? -
Correct Answer: Repair activity
13. When a hazard could harm personnel or equipment, what must be used? - Correct
Answer: Danger Tag
14. When special instructions are required, what must be used? - Correct Answer:
Caution Tag
15. Who authorizes hanging or removal of tags and labels? - Correct Answer:
Authorizing Officer
16. What must you verify while performing a tagout? - Correct Answer: The tagged out
components are in the prescribed position
, 17. Who is responsible to ensure personnel assigned to the engineering department follow
the TUMS? - Correct Answer: Engineering Officer
18. What instruction provides Tag-out standards for ships force and repair activity? -
Correct Answer: Tagout user's manual (TUM)
19. Who is in charge of the tagout log while underway? - Correct Answer: EOOW
20. Who is in charge of the tagout log while in port? - Correct Answer: EDO
21. Who performs the maintenance actions on properly tagged out equipment? -
Correct Answer: Maintenance Person
22. What color are caution tags? - Correct Answer: Yellow
23. What color are danger tags? - Correct Answer: Red
24. What color are out of calibration labels? - Correct Answer: Orange
25. What is used to prohibit the operation of equipment? - Correct Answer: Danger Tag
26. What is used when an instrument error is small and inconsistent? - Correct Answer:
Out of calibration label
27. What must be done after the TORS has been prepared and signed by the petty officer in
charge? - Correct Answer: Signed by the independent reviewer
Ace 2026-2027 Includes Frequently Tested Questions
With ELABORATED 100% Correct COMPLETE
SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Who is responsible for designating the QAO? - Correct Answer: CO
2. Who is responsible for reviewing and approving FWP and CWP? - Correct Answer:
DH
3. Who ensures that Test, Measuring, and Diagnostic Equipment (TMDE) has current
calibration stickers? - Correct Answer: Craftsman
4. Who verifies that work has been completed by entering their initial or signature on all
applicable QA forms, tags, and CWB? - Correct Answer: QAI
5. Who verifies that completed test results for controlled work fully satisfy test
requirements and initiates corrective action if they do not? - Correct Answer: QAI
6. Who coordinates and administers the QA program within their respective work center? -
Correct Answer: QAI
7. Level I materials must be closely tracked and controlled by whom? - Correct Answer:
Controlled material petty officer (CMPO)
,8. What must be used to identify and trace controlled materials? - Correct Answer: QA
tags
9. Which form is used to authorize the start of work on all ship systems and equipment by
activities other than the ship force? - Correct Answer: Work authorization form
(WAF)
10. Which QA document is used to record and authorize deviations from technical
documents? - Correct Answer: Departure from specifications (DFS)
11. What is used to indicate a step in a work procedure that MUST be performed correctly
the first time and requires close supervision? - Correct Answer: Critical quality
control points (Q-Points)
12. What are non-crew members that perform maintenance on the ship called? -
Correct Answer: Repair activity
13. When a hazard could harm personnel or equipment, what must be used? - Correct
Answer: Danger Tag
14. When special instructions are required, what must be used? - Correct Answer:
Caution Tag
15. Who authorizes hanging or removal of tags and labels? - Correct Answer:
Authorizing Officer
16. What must you verify while performing a tagout? - Correct Answer: The tagged out
components are in the prescribed position
, 17. Who is responsible to ensure personnel assigned to the engineering department follow
the TUMS? - Correct Answer: Engineering Officer
18. What instruction provides Tag-out standards for ships force and repair activity? -
Correct Answer: Tagout user's manual (TUM)
19. Who is in charge of the tagout log while underway? - Correct Answer: EOOW
20. Who is in charge of the tagout log while in port? - Correct Answer: EDO
21. Who performs the maintenance actions on properly tagged out equipment? -
Correct Answer: Maintenance Person
22. What color are caution tags? - Correct Answer: Yellow
23. What color are danger tags? - Correct Answer: Red
24. What color are out of calibration labels? - Correct Answer: Orange
25. What is used to prohibit the operation of equipment? - Correct Answer: Danger Tag
26. What is used when an instrument error is small and inconsistent? - Correct Answer:
Out of calibration label
27. What must be done after the TORS has been prepared and signed by the petty officer in
charge? - Correct Answer: Signed by the independent reviewer
