MSSC Test Part 2 with Complete
Solutions
Electrical - ANS-A CO2 fire extinguisher is used for which type of fire? ______.
a) Magnesium
b) Paper
c) Electrical
d) Wood
Overloading a circuit - ANS-Which of the following is considered an electrical hazard?
___________.
a) Working on a known dead circuit
b) Using a properly grounded electrical cord
c) Using circuit protection devices
d) Overloading a circuit
Never work on a live electrical circuit - ANS-When performing work on equipment you
should __________.
a) Only work on live electrical circuits when necessary to avoid disrupting production
b) Only use lockout\tagout procedures if the shift will change during the repair and a
new operator will arrive
c) Just tag out the equipment and not use your lock to save time
d) Never work on a live electrical circuit
Prevent someone from energizing a circuit that is dangerous or being worked on - ANS-
An electrical lockout\tagout system is designed _________________. a) Deter a
criminal
b) Keep unauthorized people from using certain electrical equipment
c) Mark a circuit that is not up to code
d) Prevent someone from energizing a circuit that is dangerous or being worked on
Test the locked out equipment for power - ANS-When performing an electrical lockout\
tagout, the last thing the worker should do is _____________.
a) Put the lock on the disconnect
b) Put the tag on the disconnect
c) Test the locked out equipment for power
d) Leave the key in the lock for others
Lock, hasp, tag - ANS-The three main components of an electrical lockout\tagout are:
___________.
a) Lock, switch, tag
, b) Lock, tag, key
c) Lock, hasp, tag
d) Hasp, tag, key
the immediate care given to an injured person until professional medical personnel
arrive - ANS-First aid is _____________________.
a) the immediate care given to an injured person until professional medical personnel
arrive
b) calming the victim
c) helping out
d) Doing the best to calm person
First aid until professional medical help arrives - ANS-First aid training enables a person
to provide _____________.
a) help with safety rules.
b) Look for violations.
c) Working faster
d) First aid until professional medical help arrives
First aid - ANS-The action taken to treat an injury until medical help arrives is called
____________.
by coming in to contact with blood or other bodily fluids. - ANS-A blood borne pathogen
is transmitted _____________.
Blood borne pathogens - ANS-Blood or other bodily fluids are a source of transmission
from one person to another called?
clean the blood spill with a 10% solution of bleach and water - ANS-An effective way to
kill any potential blood borne pathogen is to ____________.
ask a bystander to call 911 while you attend to the victim - ANS-If you are the only
trained first aid provider at the scene of an accident you should ________________.
only move the person if they are in immediate danger - ANS-When attending to a
person with possible broken bones you should ____________.
swallowed a cleaning chemical - ANS-Call 911 immediately if you notice that another
worker has ___________.
minor burns - ANS-Cold water is the best treatment for _________.
call 911 or poison control and tell them what chemical was taken - ANS-If a person has
swallowed a chemical you should ______________.
Solutions
Electrical - ANS-A CO2 fire extinguisher is used for which type of fire? ______.
a) Magnesium
b) Paper
c) Electrical
d) Wood
Overloading a circuit - ANS-Which of the following is considered an electrical hazard?
___________.
a) Working on a known dead circuit
b) Using a properly grounded electrical cord
c) Using circuit protection devices
d) Overloading a circuit
Never work on a live electrical circuit - ANS-When performing work on equipment you
should __________.
a) Only work on live electrical circuits when necessary to avoid disrupting production
b) Only use lockout\tagout procedures if the shift will change during the repair and a
new operator will arrive
c) Just tag out the equipment and not use your lock to save time
d) Never work on a live electrical circuit
Prevent someone from energizing a circuit that is dangerous or being worked on - ANS-
An electrical lockout\tagout system is designed _________________. a) Deter a
criminal
b) Keep unauthorized people from using certain electrical equipment
c) Mark a circuit that is not up to code
d) Prevent someone from energizing a circuit that is dangerous or being worked on
Test the locked out equipment for power - ANS-When performing an electrical lockout\
tagout, the last thing the worker should do is _____________.
a) Put the lock on the disconnect
b) Put the tag on the disconnect
c) Test the locked out equipment for power
d) Leave the key in the lock for others
Lock, hasp, tag - ANS-The three main components of an electrical lockout\tagout are:
___________.
a) Lock, switch, tag
, b) Lock, tag, key
c) Lock, hasp, tag
d) Hasp, tag, key
the immediate care given to an injured person until professional medical personnel
arrive - ANS-First aid is _____________________.
a) the immediate care given to an injured person until professional medical personnel
arrive
b) calming the victim
c) helping out
d) Doing the best to calm person
First aid until professional medical help arrives - ANS-First aid training enables a person
to provide _____________.
a) help with safety rules.
b) Look for violations.
c) Working faster
d) First aid until professional medical help arrives
First aid - ANS-The action taken to treat an injury until medical help arrives is called
____________.
by coming in to contact with blood or other bodily fluids. - ANS-A blood borne pathogen
is transmitted _____________.
Blood borne pathogens - ANS-Blood or other bodily fluids are a source of transmission
from one person to another called?
clean the blood spill with a 10% solution of bleach and water - ANS-An effective way to
kill any potential blood borne pathogen is to ____________.
ask a bystander to call 911 while you attend to the victim - ANS-If you are the only
trained first aid provider at the scene of an accident you should ________________.
only move the person if they are in immediate danger - ANS-When attending to a
person with possible broken bones you should ____________.
swallowed a cleaning chemical - ANS-Call 911 immediately if you notice that another
worker has ___________.
minor burns - ANS-Cold water is the best treatment for _________.
call 911 or poison control and tell them what chemical was taken - ANS-If a person has
swallowed a chemical you should ______________.
