NCLE Exam Questions and
Answers: Verified Study Guide,
Exams of Nursing Assured A+
Certified Pass
Assessment of the quality of the peripheral curves (blends of a rigid contact lens)
is achieved by the use of the-
a. profile analyzer
b. shadow graph
c. keratometer
d. burton light - ANSWERS-a. profile analyzer
Contact lens power should be specified in-
a. back vertex power
b. sphero-cylinder power
c. power in situ
d. posterier apical radius - ANSWERS-a. back vertex power
The slit-lamp illumination that gives an overall view of the cornea but limits detail
is-
a. sclerotic scatter
b. diffuse
,c. specular reflection
d. oscilatory - ANSWERS-b. diffuse
When a keratometric miers reflected off a soft contact lens are only clear when
the wearer blinks, the lens fit is too-
a. small
b. large
c. steep
d. flat - ANSWERS-c. steep
Transient keratometric mier distortion is usually due to-
a. pre-ocular tear film abnormalities
b. prolonged rigid lens wear
c. prolonged soft lens wear
d. irregular corneal astigmatism - ANSWERS-a. pre-ocular tear film abnormalities
Epithelial edema which manifests itself clinically as central corneal haze, is verified
by the slit lamp using sclerotic scatter illumination. What specific technique does
the examiner use to see this condition?
a. the naked eye and an angle between the slit lamp beam and the eye of 90˚
b. the blue cobalt filter of the slit lamp and an angle of about 45˚
c. the green filter of the slit lamp with high magnification
,d. high magnification and an angle between the beam and scope of 180˚ -
ANSWERS-a. the naked eye and an angle between the slit lamp beam and the
eye of 90˚
With a rigid contact lens in place a flourescein pattern shows a narrow bend
horizontally wih a concentration of flourescein inferiorly and superiorly under the
lens. Which one of the following type of astigmatism is represented by this
pattern?
a. lenticular astigmatism
b. residual astigmatism
c. against the rule astigmatism
d. with the rule astigmatism - ANSWERS-d. with the rule astigmatism
Refractive Rx -3.00 -1.00 x 170
K's 42.00 @ 170/43.00 @ 80
Given the above Rx and K's he following diagnostic toric soft lens was used:
B.C. 8.8
Power -3.00 -1.00 x 180
During dianostic evalutation, the above lens rotated 10 clockwise. The lens
ordered should have an axis of:
a. 10
b. 180
c. 170
d. 160 - ANSWERS-b. 180
, Given the same circumstances from the above question, once the correctly
ordered lens has been dispensed, the rotational marks should settle at _______.
a. 6 o clock
b. 10 clockwise rotation
c. 10 counter clockwise rotation
d. none of the above - ANSWERS-b. 10 clockwise rotation
An instrument that allows simultaneous verification of lens diameter, optic zone
width, and peripheral curve width is:
a. measuring magnifier
b. ophthalmometer
c. profile analyzer
d. radiuscope - ANSWERS-a. measuring magnifier
(the book says d. radiuscope)
The instrument used for magnification of the edge of a rigid CL is a _______.
a. radiuscope
b. shadowgraph
c. profile analysis
d. keratometer - ANSWERS-b. shadowgraph
Mary is wearing in her right eye RGP lens with a base curve of 43.50 and a power
of +2.75. The doctor refracts -0.75 sphere over this lens. If you wish to order her a
new lens with a curve of 43.00, what will the new power be?
Answers: Verified Study Guide,
Exams of Nursing Assured A+
Certified Pass
Assessment of the quality of the peripheral curves (blends of a rigid contact lens)
is achieved by the use of the-
a. profile analyzer
b. shadow graph
c. keratometer
d. burton light - ANSWERS-a. profile analyzer
Contact lens power should be specified in-
a. back vertex power
b. sphero-cylinder power
c. power in situ
d. posterier apical radius - ANSWERS-a. back vertex power
The slit-lamp illumination that gives an overall view of the cornea but limits detail
is-
a. sclerotic scatter
b. diffuse
,c. specular reflection
d. oscilatory - ANSWERS-b. diffuse
When a keratometric miers reflected off a soft contact lens are only clear when
the wearer blinks, the lens fit is too-
a. small
b. large
c. steep
d. flat - ANSWERS-c. steep
Transient keratometric mier distortion is usually due to-
a. pre-ocular tear film abnormalities
b. prolonged rigid lens wear
c. prolonged soft lens wear
d. irregular corneal astigmatism - ANSWERS-a. pre-ocular tear film abnormalities
Epithelial edema which manifests itself clinically as central corneal haze, is verified
by the slit lamp using sclerotic scatter illumination. What specific technique does
the examiner use to see this condition?
a. the naked eye and an angle between the slit lamp beam and the eye of 90˚
b. the blue cobalt filter of the slit lamp and an angle of about 45˚
c. the green filter of the slit lamp with high magnification
,d. high magnification and an angle between the beam and scope of 180˚ -
ANSWERS-a. the naked eye and an angle between the slit lamp beam and the
eye of 90˚
With a rigid contact lens in place a flourescein pattern shows a narrow bend
horizontally wih a concentration of flourescein inferiorly and superiorly under the
lens. Which one of the following type of astigmatism is represented by this
pattern?
a. lenticular astigmatism
b. residual astigmatism
c. against the rule astigmatism
d. with the rule astigmatism - ANSWERS-d. with the rule astigmatism
Refractive Rx -3.00 -1.00 x 170
K's 42.00 @ 170/43.00 @ 80
Given the above Rx and K's he following diagnostic toric soft lens was used:
B.C. 8.8
Power -3.00 -1.00 x 180
During dianostic evalutation, the above lens rotated 10 clockwise. The lens
ordered should have an axis of:
a. 10
b. 180
c. 170
d. 160 - ANSWERS-b. 180
, Given the same circumstances from the above question, once the correctly
ordered lens has been dispensed, the rotational marks should settle at _______.
a. 6 o clock
b. 10 clockwise rotation
c. 10 counter clockwise rotation
d. none of the above - ANSWERS-b. 10 clockwise rotation
An instrument that allows simultaneous verification of lens diameter, optic zone
width, and peripheral curve width is:
a. measuring magnifier
b. ophthalmometer
c. profile analyzer
d. radiuscope - ANSWERS-a. measuring magnifier
(the book says d. radiuscope)
The instrument used for magnification of the edge of a rigid CL is a _______.
a. radiuscope
b. shadowgraph
c. profile analysis
d. keratometer - ANSWERS-b. shadowgraph
Mary is wearing in her right eye RGP lens with a base curve of 43.50 and a power
of +2.75. The doctor refracts -0.75 sphere over this lens. If you wish to order her a
new lens with a curve of 43.00, what will the new power be?
