EM 385 1-1 EXAM
When operating an aerial lift - ANSWERS-install wheel chocks
before using on a slope, maintainthe aerial devices manufacturing
operations manual near at all times, test lift controls each day prior to
use to ensure proper
When movement of materials may be hazardous - ANSWERS-
personal fall arrest system must be rigged that - ANSWERS-
In order to protect against electrocution the follow is required -
ANSWERS-don't used wooden tools, don't wear synthetic clothing or
cotton blends,
Covers must support the weight of the worker, equipment and tools -
ANSWERS-at least 2x
scaffold planks stall be maintained in good condition and shall not be
used when - ANSWERS-Cracks are more than 1.5 times the width of
planks, saw kerf planks
Personal fall protection equipment and systems does not include -
ANSWERS-guardrails
, scaffold inspections must be documented, scaffold inspection tag and
all scaffolds will be tagged by the competent person prior to use. Tags
must include... - ANSWERS-
a warning line system shall consist or _________ supported by
sanctions and shall be erected around all sides of the work area -
ANSWERS-ropes, wires or chains
truck drivers and passengers may remain in the vehicle unless -
ANSWERS-All of the above
Requirements for workers working at heights and using fall protection
equipment - ANSWERS-6ft
excavated material shall be placed at least ________ from the edge of
the excavation edge - ANSWERS-2 feet
Fall arresters must have minimum stretch of_____ and ultimate
strength of ____ - ANSWERS-6ft, 5,000lbs
When the movement of materials may be hazardous to persons
_______or other deceives shall be used to control the loads being
handled by hoisting equipment - ANSWERS-taglines
Which of the following elements shall be addressed in a confined
space program (except) - ANSWERS-
When operating an aerial lift - ANSWERS-install wheel chocks
before using on a slope, maintainthe aerial devices manufacturing
operations manual near at all times, test lift controls each day prior to
use to ensure proper
When movement of materials may be hazardous - ANSWERS-
personal fall arrest system must be rigged that - ANSWERS-
In order to protect against electrocution the follow is required -
ANSWERS-don't used wooden tools, don't wear synthetic clothing or
cotton blends,
Covers must support the weight of the worker, equipment and tools -
ANSWERS-at least 2x
scaffold planks stall be maintained in good condition and shall not be
used when - ANSWERS-Cracks are more than 1.5 times the width of
planks, saw kerf planks
Personal fall protection equipment and systems does not include -
ANSWERS-guardrails
, scaffold inspections must be documented, scaffold inspection tag and
all scaffolds will be tagged by the competent person prior to use. Tags
must include... - ANSWERS-
a warning line system shall consist or _________ supported by
sanctions and shall be erected around all sides of the work area -
ANSWERS-ropes, wires or chains
truck drivers and passengers may remain in the vehicle unless -
ANSWERS-All of the above
Requirements for workers working at heights and using fall protection
equipment - ANSWERS-6ft
excavated material shall be placed at least ________ from the edge of
the excavation edge - ANSWERS-2 feet
Fall arresters must have minimum stretch of_____ and ultimate
strength of ____ - ANSWERS-6ft, 5,000lbs
When the movement of materials may be hazardous to persons
_______or other deceives shall be used to control the loads being
handled by hoisting equipment - ANSWERS-taglines
Which of the following elements shall be addressed in a confined
space program (except) - ANSWERS-
