PA Safety Inspection exam with answers
ASME Code - CORRECT ANSWERS ✔✔The American
Society of Mechanical Engineers Boiler and Pressure
Vessel Code
ASTM - CORRECT ANSWERS ✔✔The American Society for
Testing and Materials; Crash Dummies
Acute Area of the Windshield - CORRECT ANSWERS
✔✔The center of the critical area on the driver's side of
the vehicle directly in the driver's normal line of vision; 8
1/2 inches wide and 5 1/2 inches high; changes with
height of driver
Allowable Working Pressure - CORRECT ANSWERS ✔✔The
pounds per square inch for which the container was
constructed, or if conditions have changed, the maximum
pressure at specified temperatures permitted at the most
recent inspection by a certified inspector; usually deals
with CNG
Alteration - CORRECT ANSWERS ✔✔A change in the
construction, design, or installation of a container that
,affects the strength or safety of the system; must be of
equal or greater strength as the original
Auxiliary Driving Lamp - CORRECT ANSWERS ✔✔A
lighting device mounted to provide illumination in front of
the vehicle and to supplement the upper beam of a
standard headlamp system; it is not intended for use
alone or with the lower beam of a standard headlamp
system
Back-Up Lamp - CORRECT ANSWERS ✔✔A lamp used to
provide illumination behind the vehicle and to provide a
warning signal when the vehicle is in reverse gear
Bead - CORRECT ANSWERS ✔✔The part of the tire made
of steel wires wrapper or reinforced by ply cords, that is
shaped to fit the rim
Belt - CORRECT ANSWERS ✔✔A layer made of fabric or
other material located under the tread area
CGA - CORRECT ANSWERS ✔✔The Compressed Gas
Association
, Cargo Lamp - CORRECT ANSWERS ✔✔A lamp mounted on
a multipurpose passenger vehicle, truck or bus that
provides illumination to load or unload cargo
Certified Inspection Mechanic - CORRECT ANSWERS ✔✔A
person who holds a valid certification card issued by the
Bureau certifying that the person is qualified, has passed
all requirements to inspect specific vehicles and holds a
valid driver's license for the correct class of vehicle
Certified Inspector - CORRECT ANSWERS ✔✔A person who
holds a certificate issued by the Boiler Division in the
Bureau of Occupation and Industrial Safety within the
Department of Labor and Industry certifying that the
person is qualified to inspect unfired pressure vessels;
usually dealing with CNG
Clearance Lamps - CORRECT ANSWERS ✔✔Lamps which
show to the front or rear of a vehicle to indicate overall
width and height of a vehicle- on trucks and buses 80
inches or more in width
Commonwealth Inspection Station - CORRECT ANSWERS
✔✔An inspection station appointed to inspect all types of
vehicles, space permitted, owned and engaged
exclusively in the performance of the official duties of the
ASME Code - CORRECT ANSWERS ✔✔The American
Society of Mechanical Engineers Boiler and Pressure
Vessel Code
ASTM - CORRECT ANSWERS ✔✔The American Society for
Testing and Materials; Crash Dummies
Acute Area of the Windshield - CORRECT ANSWERS
✔✔The center of the critical area on the driver's side of
the vehicle directly in the driver's normal line of vision; 8
1/2 inches wide and 5 1/2 inches high; changes with
height of driver
Allowable Working Pressure - CORRECT ANSWERS ✔✔The
pounds per square inch for which the container was
constructed, or if conditions have changed, the maximum
pressure at specified temperatures permitted at the most
recent inspection by a certified inspector; usually deals
with CNG
Alteration - CORRECT ANSWERS ✔✔A change in the
construction, design, or installation of a container that
,affects the strength or safety of the system; must be of
equal or greater strength as the original
Auxiliary Driving Lamp - CORRECT ANSWERS ✔✔A
lighting device mounted to provide illumination in front of
the vehicle and to supplement the upper beam of a
standard headlamp system; it is not intended for use
alone or with the lower beam of a standard headlamp
system
Back-Up Lamp - CORRECT ANSWERS ✔✔A lamp used to
provide illumination behind the vehicle and to provide a
warning signal when the vehicle is in reverse gear
Bead - CORRECT ANSWERS ✔✔The part of the tire made
of steel wires wrapper or reinforced by ply cords, that is
shaped to fit the rim
Belt - CORRECT ANSWERS ✔✔A layer made of fabric or
other material located under the tread area
CGA - CORRECT ANSWERS ✔✔The Compressed Gas
Association
, Cargo Lamp - CORRECT ANSWERS ✔✔A lamp mounted on
a multipurpose passenger vehicle, truck or bus that
provides illumination to load or unload cargo
Certified Inspection Mechanic - CORRECT ANSWERS ✔✔A
person who holds a valid certification card issued by the
Bureau certifying that the person is qualified, has passed
all requirements to inspect specific vehicles and holds a
valid driver's license for the correct class of vehicle
Certified Inspector - CORRECT ANSWERS ✔✔A person who
holds a certificate issued by the Boiler Division in the
Bureau of Occupation and Industrial Safety within the
Department of Labor and Industry certifying that the
person is qualified to inspect unfired pressure vessels;
usually dealing with CNG
Clearance Lamps - CORRECT ANSWERS ✔✔Lamps which
show to the front or rear of a vehicle to indicate overall
width and height of a vehicle- on trucks and buses 80
inches or more in width
Commonwealth Inspection Station - CORRECT ANSWERS
✔✔An inspection station appointed to inspect all types of
vehicles, space permitted, owned and engaged
exclusively in the performance of the official duties of the
